My unit, don't do much car audio TV/ vcr tech. Alpine model: CDA-7840 manf 1999 AM-FM CD have replaced audio output ic:TDA7386 also resolder some iffy connections, no schematic.The input (too the audio out ic ) and line output level output will go very low sometimes, the mute and stby pins don't change when this happens.Uses a TEA6320 as audio controller the input pin 13 does not change when problem occurs the output ( pins 3,4 29 & 30 ) decrees in amplitude dc stays unchanged.Is there a history of this IC being interment or is there tips for this problem? Unit will play fine for days then act up, passes vibration test.Help.tia Country TV Ron Miller 484 FM444 S. Inez,TX 77968-5002 V.(361)782-6419. F.(361)782-9149 e-mail: rlmbkm@xxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/