Hi Dave check this out..Eric igital GB4308, GB5108 Looks like RGB bowtie, no vertical sweep. Replace vertical output IC N301, TDA8351. Check supply R370, R371, both 1ohm. APEX GB5108 PICTURE REDUCED TO A TWIRLY LINE ACROSS SCREEN VERTICAL IC TDA8351 1 OHM RESISTOR FROM SCAN SOURCE Eric E M Electronics Deer Lake Nfld Canada tvman@xxxxxxxxxxxxxxx Dave Huston wrote: > This one has a bowtie shaped line across center of screen. (together in > center and about 2 inches high at edges. Not sure if it is a vertical > collapse or a convergence problem. Hoping someone has ran into this and can > point me in the right direction. > Thanks, > > Dave Huston > Huston TV & Electronics > 2846 Marion-Cardington Rd.E. > Marion,Oh 43302-8919 > Phone/Fax: 740-389-5726 > email: HustonTV@xxxxxxxxxxxxxx > > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/