According to ECG and NTE cross references all versions of 2SD2539,lb,ma have an internal damper diode. When in doubt use a HOT with internal damper diode, it will work in most instances I have encountered. Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc Dallas, TX ----- Original Message ----- From: <MDileo0000@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, December 30, 2003 1:56 PM Subject: [TechAssist] 2SD2539 and 2SD2539LBMA1(Panasonic) > I hope someone can clear this up. My factory schematic for a Panasonic > CT32G5B, ch. #ABP331, shows a 2SD2539LBMA1 as the H.O.T without an internal damper > diode. It does show an external damper stack with a parabola source for the > pincushion correction circuit, much the same as in an RCA CTC169 chassis. It > seems that this transistor is a special configuration w/o damper for > Panasonic/Quasar. I found the 2SD2539 specs in the Toshiba site and it does indeed > include a damper diode. > > Dominic DiLeo > Atlantic TV > Freeport, Maine > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/