This thing is only 6 months old. model 27ms345s no chassis # found man. July 2003 Customer's complaint was it had no Audio originally. He called 'help line',they said unplug it for 15 minutes to Reset it. When he plugged it back in, it wouldn't even come on. He's close but not exactly......... No picture,Sound or OSD on Tuner or A/V input. HV is OK. Vertical Deflection is OK. Filament is OK. Turning up Screen Control(G2) produces Blank Raster. All voltages seem fine on PS Secondary Rectifiers,any TO220 regulators(5v,9v,12v),B+ is on Audio Output also. Stand-by Light comes on at Plug-in. Both Power Switch and Remote will turn the set on(stand-by light goes out)............ ..........more troubleshooting........... The Set turned on with the Remote fine but no Audio. Channels changed(Blue Screen til I hit an active channel), had reception,OSD..... ......everything but Sound. Turned set Off,and back On.......Blank Raster,no Sound no OSD. Haven't been able to get it to come back on properly Peggs Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 peggs@xxxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/