Charlie, Thanks for asking, I didn't think about error codes. Thanks for sending them to me, I could use a schematic if it's not too much trouble. I have been trying to fix this for weeks. I suspect trouble in either the HOT/flyback or power supply circuits, maybe the jungle chip area. Bil ----- Original Message ----- From: "Charles Belich" <seashell@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, November 21, 2001 6:59 PM Subject: [TechAssist] Re: (((1999 27" SONY Shuts Off))) > > Bill is the LED flashing a error code ?........Charlie > > Charles Belich > Slidewire Electronics > MN Mailto:seashell@xxxxxxxxxx > > ----- Original Message ----- > From: "Bil Green" <tv.vcrrepair@xxxxxxxxxxx> > To: ".Techassist" <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, November 21, 2001 4:27 PM > Subject: [TechAssist] (((1999 27" SONY Shuts Off))) > > > > > > Sony KV27S42 > > 1999 model > > Turns OFF as soon as screen lights up (then red LED blinks) > > > > The screen lights up rainbow colored (no video or snow) with > > the colors running up from the bottom (CRT tests o.k.) > > > > Very bright, but no retrace lines > > The CRT screen and cathodes voltages are normal > > HV is o.k. > > Focus Voltage is 8KV > > > > Disconnecting both the HV lead and the CRT socket - No help > > (still turns off and red LED keeps blinking) > > > > I replaced the flyback as recommended by someone who had > > similar problems with several Sony's, also the RGB output > > chip - No help > > > > Bil > > > > > > ================================= > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ================================= > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > > > > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe