FIXED!! Changed center LED. Cleaned mode switch. Thanks Eric. Saved me time playing with power supply again.. Bruce. ----- Original Message ----- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, May 11, 2004 2:07 PM Subject: [TechAssist] 14"Syl TV/VCR (WLTR13G)1997.POWER SUPPLY PROBLEM? > Paper and toys in vcr when this came in. Power supply blown. Replaced the > fuse, power FET transistor in the switch mode supply. The T.V will play no > problem. When a tape is inserted it will play ,then VCR and TV shut down > completely after 2 minutes. I found the 12volt supply to the VCR and changed > the transistor and supply diode, thinking it must be this supply since the > condition happens when the VCR plays.. would help if I had a print.. I also > soldered the H.O.T and driver transistor section just to make sure. > If some one has a print for power supply would really appreciate it , or > tips on this unit. > > thank you, > Bruce. > > B&T Electronics > 139 Margaret St > Sarnia Ontario > Canada > N7T 2Y3 > 519 344 1850 > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/