I should have asked if the core's ends are flat or does it look like it fractured, if so replace the IHVT. Check your Horiz output too. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "OrpheusComputing.com Repair" <techassist@xxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, November 17, 2001 12:28 PM Subject: [TechAssist] Re: 13"magTV #HD1305 flyback - core fell apart > > That's worked ok with me before. I don't think I used epoxy, > I think I used something like JB Weld.... > -Clint > > God Bless Us All > Clint Hamilton, Owner > http://OrpheusComputing.com > sales@xxxxxxxxxxxxxxxxxxxx > Fax: 209-882-9602 > TechAssist Administration > http://tech-assist.org > techassist@xxxxxxxxxxxxx > > ----- Original Message ----- > From: "Tony-Electronics Inc." <farful@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, November 17, 2001 10:47 AM > Subject: [TechAssist] 13"magTV #HD1305 flyback - core fell > apart > > > > this TV came in with no power..I think it needs a > regulator -- had to > order..could not find any other problems, went to button it > up and wait for > part- noticed the top half of the iron core on fly back > loose, felt it with > my hand and it just came off? is it okay to just epoxy this > back on? Or is > that fly back shot? Any help greatly appreciated -- Tony > > Electronics Inc. > 7027 Hwy 441 > Dillard , GA 30537 > 706-746-3353 > farful@xxxxxxxx > electronics@xxxxxxxxxx > > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > > > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > ***************************************** Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips ***************************************** To UNSUBSCRIBE write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.