I like it, 2.6 inch Nike's on i800 motors! Sam On 4/24/2012 11:02 AM, Jack Garibaldi wrote:
Matt Maybe we have Kenny go first then we can do the drag race after his launch he will be like the Pilot car in IndyJack G*From:*tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] *On Behalf Of *Matt Powell*Sent:* Tuesday, April 24, 2012 10:55 AM *To:* tccrockets@xxxxxxxxxxxxx *Subject:* [tccrockets] Re: Nike Drag Race So,Is there space for a level 1 to race. Or just for the big boys. Kenny found the 2.5 glass Nike Madcow 38mm . Jack do you have any Nike stock for 38mm.Matt*From:*tccrockets-bounce@xxxxxxxxxxxxx <mailto:tccrockets-bounce@xxxxxxxxxxxxx> [mailto:tccrockets-bounce@xxxxxxxxxxxxx] <mailto:[mailto:tccrockets-bounce@xxxxxxxxxxxxx]> *On Behalf Of *Jack Garibaldi*Sent:* Monday, April 23, 2012 5:16 PM *To:* TCC -Chat *Subject:* [tccrockets] Nike Drag Race Hi AllOk James woke up the Nike crowd and I have been getting e-mails and phone calls on what we are doing so here it is.Nike Drag race on any size Nike Smoke you want but it has to have a K motor in it or larger if you decide to fly a larger Nike. Repeat- Has to be a Nike Smoke now the motor of choice was the K2045 I will have about 14 or 15 of them and if you are in the drag race with a K2045 I will do the motor for $99.00 only the K2045 so if you have a Nike and want to fly another motor you can but I am not sure why you would want to get your assed kicked with something less. I also have Nike's in stock in all sizes 4", 5.5", 7.5" and 10" in the Polecat brand and I have a few of the Madcow 4" glass Nikes which are basically the Performance Nike's. I saw a post where Aaron wanted to fly the K1103X well as long as it is in a Nike then fine but the problem Aaron is we did this motor as a demo last year and Steve Sawyer got whipped with that motor and I talked to Aerotech and they are still not California certified a year later, so Karl is going to let me know when it can go into California. So any questions?Jack G