Maybe XPRS Sent from my iPhone On Jul 9, 2011, at 8:14 AM, KI6PQQ <theacf@xxxxxxxxxxx> wrote: > Are you flying at balls > > James Marino <jmarino1@xxxxxxxxxxxxx> wrote: > >> Gonna rip the fins off another one? Only James can peel a carbon >> lay-up! >> >> J >> >> ----- Original Message ----- >> From: James Dougherty >> To: tccrockets@xxxxxxxxxxxxx >> Cc: tccrockets@xxxxxxxxxxxxx >> Sent: Friday, July 08, 2011 10:45 PM >> Subject: [tccrockets] Re: Intimidator 4 >> >> >> Carbon fiber, vaccuum bag and Cotronics 4525 / Kevlar pulp fillets >> Messy, but worth the effort >> I'm gonna fly another c-star just to prove finish is everything :-) >> >> >> >> Sent from my iPhone >> >> On Jul 8, 2011, at 10:45 AM, Rob Diehl <rwdiehl@xxxxxxxxxxxxx> wrote: >> >> >> Did you guys use injected internal fillets? Or did you reinforce with >> carbon/kevlar cloth and foam? >> >> >> >> >> ---------------------------------------------------------------------------- >> From: mike bailey <aerofabb@xxxxxxxxxxxx> >> To: tccrockets@xxxxxxxxxxxxx >> Sent: Fri, July 8, 2011 1:45:32 AM >> Subject: [tccrockets] Re: Intimidator 4 >> >> It will go into a Kosdon 75/7600 casing. they same size. I have one. >> >> >> >> >> >> -----Original Message----- >> From: Karl Baumheckel <karlbaum@xxxxxxxxxxx> >> To: tccrockets <tccrockets@xxxxxxxxxxxxx> >> Sent: Thu, Jul 7, 2011 8:26 pm >> Subject: [tccrockets] Re: Intimidator 4 >> >> >> Just to clarify the M1450 is a KBA "Animal Compatible" and goes in the AMW >> 7600 case with a reusable nozzle. One nice thing about the AMW case is that >> it is great for EX motors. It seems like a great deal to me. >> >> >> >> >> ---------------------------------------------------------------------------- >> From: "mike bailey" <aerofabb@xxxxxxxxxxxx> >> To: tccrockets@xxxxxxxxxxxxx >> Sent: Thursday, July 7, 2011 7:09:38 PM >> Subject: [tccrockets] Re: Intimidator 4 >> >> I would use a Kosdon by Aerotech 75/7600 , M1450 its 7813.0Ns motor and >> was use to set the M altitude record, its more powerful than the M1850W >> 7658.6Ns. and for around 299.00 its about a hundred dollars cheaper than >> the M1850W >> >> >> >> >> -----Original Message----- >> From: Aaron Stanley <rocketguy1317@xxxxxxxxxxx> >> To: tccrockets <tccrockets@xxxxxxxxxxxxx> >> Sent: Wed, Jul 6, 2011 7:07 pm >> Subject: [tccrockets] Re: Intimidator 4 >> >> >> The AeroTech M1850W is no puss motor for the 75/7680. It lofted my >> Performance Rocketry Competitor 4 to 18,600 feet. >> >> >> Video by James Dougherty: >> http://www.youtube.com/watch?v=wdRS2xaqtbc >> >> >> But just leave that 75mm motor mount out of the Intimidator 4, make it a >> minimum diameter, and fly it on an M750W 8^D >> >> >> Aaron Stanley >> LUNAR# 1322 >> AEROPAC# 680 >> SARG# 10 - Equipment Manager >> TRA# 10834 L3 >> NAR# 84298 L3 >> West Coast Aerotech Demo representative. >> Aerotech the BEST way to fly. >> >> >> >> >> >> ---------------------------------------------------------------------------- >> From: "James Marino" <jmarino1@xxxxxxxxxxxxx> >> To: tccrockets@xxxxxxxxxxxxx >> Sent: Wednesday, July 6, 2011 10:22:46 AM >> Subject: [tccrockets] Re: Intimidator 4 >> >> >> It has to fly on puss motors. It has a 75mm mount. >> >> The Intimidator 5 and the Competitor 5 both have 98mm holes in the >> bottom. >> >> They take real motors. 8^) >> >> J >> >> ----- Original Message ----- >> From: Jack Garibaldi >> To: tccrockets@xxxxxxxxxxxxx >> Sent: Tuesday, July 05, 2011 10:33 PM >> Subject: [tccrockets] Re: Intimidator 4 >> >> >> Yes as long as you don’t fly it on any puss motor >> >> Jack G >> >> From: tccrockets-bounce@xxxxxxxxxxxxx >> [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl >> Sent: Tuesday, July 05, 2011 10:10 PM >> To: tccrockets@xxxxxxxxxxxxx >> Subject: [tccrockets] Intimidator 4 >> >> Ok, I got my Intimidator 4 kit today. Does anyone know where I can find >> 2 TAP’s to do my L3? >> >> >> Rob