Right on James Glad to see you back in action!!! Sent from my iPhone On Jul 8, 2011, at 11:00 AM, "James Marino" <jmarino1@xxxxxxxxxxxxx> wrote: > I have what amounts to the same rocket, the Competitor 4. I did a > lay-up with glass over carbon, and Kevlar pulp doped fillets. Holds up well > to 6000 NSec research M's. So far. 18K at Black Rock. > > Have one just like it we'll be staging at XPRS-Rx this September. > Full M to a 6KNSec M. It'll kiss Mach 3. I expect it to come back OK, if not > with a little slipped paint. 8^) > > James > > ----- Original Message ----- > From: Rob Diehl > To: tccrockets@xxxxxxxxxxxxx > Sent: Friday, July 08, 2011 10:45 AM > Subject: [tccrockets] Re: Intimidator 4 > > Did you guys use injected internal fillets? Or did you reinforce with > carbon/kevlar cloth and foam? > > From: mike bailey <aerofabb@xxxxxxxxxxxx> > To: tccrockets@xxxxxxxxxxxxx > Sent: Fri, July 8, 2011 1:45:32 AM > Subject: [tccrockets] Re: Intimidator 4 > > It will go into a Kosdon 75/7600 casing. they same size. I have one. > > > > -----Original Message----- > From: Karl Baumheckel <karlbaum@xxxxxxxxxxx> > To: tccrockets <tccrockets@xxxxxxxxxxxxx> > Sent: Thu, Jul 7, 2011 8:26 pm > Subject: [tccrockets] Re: Intimidator 4 > > Just to clarify the M1450 is a KBA "Animal Compatible" and goes in the AMW > 7600 case with a reusable nozzle. One nice thing about the AMW case is that > it is great for EX motors. It seems like a great deal to me. > > > > From: "mike bailey" <aerofabb@xxxxxxxxxxxx> > To: tccrockets@xxxxxxxxxxxxx > Sent: Thursday, July 7, 2011 7:09:38 PM > Subject: [tccrockets] Re: Intimidator 4 > > I would use a Kosdon by Aerotech 75/7600 , M1450 its 7813.0Ns motor and was > use to set the M altitude record, its more powerful than the M1850W > 7658.6Ns. and for around 299.00 its about a hundred dollars cheaper than > the M1850W > > > -----Original Message----- > From: Aaron Stanley <rocketguy1317@xxxxxxxxxxx> > To: tccrockets <tccrockets@xxxxxxxxxxxxx> > Sent: Wed, Jul 6, 2011 7:07 pm > Subject: [tccrockets] Re: Intimidator 4 > > The AeroTech M1850W is no puss motor for the 75/7680. It lofted my > Performance Rocketry Competitor 4 to 18,600 feet. > > Video by James Dougherty: > http://www.youtube.com/watch?v=wdRS2xaqtbc > > But just leave that 75mm motor mount out of the Intimidator 4, make it a > minimum diameter, and fly it on an M750W 8^D > > Aaron Stanley > LUNAR# 1322 > AEROPAC# 680 > SARG# 10 - Equipment Manager > TRA# 10834 L3 > NAR# 84298 L3 > West Coast Aerotech Demo representative. > Aerotech the BEST way to fly. > > > > From: "James Marino" <jmarino1@xxxxxxxxxxxxx> > To: tccrockets@xxxxxxxxxxxxx > Sent: Wednesday, July 6, 2011 10:22:46 AM > Subject: [tccrockets] Re: Intimidator 4 > > It has to fly on puss motors. It has a 75mm mount. > > The Intimidator 5 and the Competitor 5 both have 98mm holes in the > bottom. > > They take real motors. 8^) > > J > > ----- Original Message ----- > From: Jack Garibaldi > To: tccrockets@xxxxxxxxxxxxx > Sent: Tuesday, July 05, 2011 10:33 PM > Subject: [tccrockets] Re: Intimidator 4 > > Yes as long as you don’t fly it on any puss motor > > Jack G > > From: tccrockets-bounce@xxxxxxxxxxxxx > [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl > Sent: Tuesday, July 05, 2011 10:10 PM > To: tccrockets@xxxxxxxxxxxxx > Subject: [tccrockets] Intimidator 4 > > Ok, I got my Intimidator 4 kit today. Does anyone know where I can find 2 > TAP’s to do my L3? > > > Rob