[tccrockets] Re: DA
- From: "Richard King" <drrbk@xxxxxxxxxxx>
- To: <tccrockets@xxxxxxxxxxxxx>
- Date: Wed, 29 Feb 2012 06:39:38 -0800
For sure I "need" those cool rail buttons in the medium size. If that retainer
will fit the 5 1/2" body tube (98mm motor) then I'll take one of those too.
RK
----- Original Message -----
From: Jack Garibaldi
To: tccrockets@xxxxxxxxxxxxx
Sent: Tuesday, February 28, 2012 9:58 PM
Subject: [tccrockets] Re: DA
Cool, yes I would use the Aeropack Retainer very clean and trustworth and
convenient and I have the key switches in stock always, Altimeter If you want
down and dirty I like the Perfect Flite Stratologger they are $79.95 and pretty
reliable, also go to my website and check out my new thrust plates they are
MilSpec anodized aluminum and have the Aeropack bolt hole pattern pre-tapped
already so you just screw it in and if your bird ever crashes then unscrew and
take with you and lastly check out my new MilSpec rail buttons in both sizes ¼"
and 5/16" that shit is Boss Hog
Jack G
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Richard King
Sent: Tuesday, February 28, 2012 9:49 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: DA
Sounds fine to me.
I've been going over the DX3's stuff and it all looks quality to me. I will
be making a few mods on the nose cone, but otherwise, it's pretty good stock.
I'll need a couple of those key switches. I may be in the market for a new
altimeter. I don't need any of the special bells and whistles, but want a
quality unit that is highly reliable. Suggestions? Also, since I'm using the
3/8" eye bolt for drogue anchor, is a special aft retainer as important? It
would look cleaner if I use one of Aerotech's jobs I guess.....
RK
----- Original Message -----
From: Jack Garibaldi
To: tccrockets@xxxxxxxxxxxxx
Sent: Tuesday, February 28, 2012 9:38 PM
Subject: [tccrockets] Re: DA
Hey Richard
I bought the lanyards and holders it came to $115.20 I also
had the launch money from last month that was $110.00 so I will snag a few
lanyards and call it even so I don't have to write the club a check then you
write me a check and we can sale them so the club makes a little bit of money.
I got 300 of the lanyards that go around your neck and 100 holders so if you
want to just punch your card you can do that or you can get a holder to put it
in. Ok that is off my list to do
Jack G
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
Sent: Tuesday, February 28, 2012 9:27 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: DA
Yeah. Last year I basically doubled the pre-orders. I can certainly get
much closer this year. The surprise was all the XXL. I think there were 2 pre
ordered and I got 2 extra. I could have sold 10.
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Richard King
Sent: Tuesday, February 28, 2012 9:24 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: DA
There will always be people that want a shirt. I always get one or
two...... We had too many small sized last year and could have used a few more
XXL as you stated. I think we have the numbers dialed in?
RK
----- Original Message -----
From: Rob Diehl
To: tccrockets@xxxxxxxxxxxxx
Sent: Tuesday, February 28, 2012 9:09 PM
Subject: [tccrockets] DA
Want t-shirts again?
I can start looking for artwork if we want to do them again.
This year I will order more XXL and fewer small sizes. Our group seems
to be expanding if you know what I mean.
Rob
Other related posts:
