[tccrockets] Re: DA
- From: James Dougherty <jafrado@xxxxxxxxx>
- To: "tccrockets@xxxxxxxxxxxxx" <tccrockets@xxxxxxxxxxxxx>
- Date: Tue, 28 Feb 2012 22:58:09 -0800
Oh damn I gotta have all that gear
Milspec
Sent from my iPhone
On Feb 28, 2012, at 9:58 PM, Jack Garibaldi <jackgaribaldi@xxxxxxx> wrote:
> Cool, yes I would use the Aeropack Retainer very clean and trustworth and
> convenient and I have the key switches in stock always, Altimeter If you want
> down and dirty I like the Perfect Flite Stratologger they are $79.95 and
> pretty reliable, also go to my website and check out my new thrust plates
> they are MilSpec anodized aluminum and have the Aeropack bolt hole pattern
> pre-tapped already so you just screw it in and if your bird ever crashes then
> unscrew and take with you and lastly check out my new MilSpec rail buttons in
> both sizes ¼” and 5/16” that shit is Boss Hog
>
> <image001.jpg><image002.jpg>
>
>
> Jack G
>
> From: tccrockets-bounce@xxxxxxxxxxxxx
> [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Richard King
> Sent: Tuesday, February 28, 2012 9:49 PM
> To: tccrockets@xxxxxxxxxxxxx
> Subject: [tccrockets] Re: DA
>
> Sounds fine to me.
> I've been going over the DX3's stuff and it all looks quality to me. I will
> be making a few mods on the nose cone, but otherwise, it's pretty good stock.
> I'll need a couple of those key switches. I may be in the market for a new
> altimeter. I don't need any of the special bells and whistles, but want a
> quality unit that is highly reliable. Suggestions? Also, since I'm using
> the 3/8" eye bolt for drogue anchor, is a special aft retainer as important?
> It would look cleaner if I use one of Aerotech's jobs I guess.....
>
> RK
>
>
> ----- Original Message -----
> From: Jack Garibaldi
> To: tccrockets@xxxxxxxxxxxxx
> Sent: Tuesday, February 28, 2012 9:38 PM
> Subject: [tccrockets] Re: DA
>
> Hey Richard
>
> I bought the lanyards and holders it came to $115.20 I also
> had the launch money from last month that was $110.00 so I will snag a few
> lanyards and call it even so I don’t have to write the club a check then you
> write me a check and we can sale them so the club makes a little bit of
> money. I got 300 of the lanyards that go around your neck and 100 holders so
> if you want to just punch your card you can do that or you can get a holder
> to put it in. Ok that is off my list to do
>
> Jack G
>
> From: tccrockets-bounce@xxxxxxxxxxxxx
> [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
> Sent: Tuesday, February 28, 2012 9:27 PM
> To: tccrockets@xxxxxxxxxxxxx
> Subject: [tccrockets] Re: DA
>
> Yeah. Last year I basically doubled the pre-orders. I can certainly get
> much closer this year. The surprise was all the XXL. I think there were 2
> pre ordered and I got 2 extra. I could have sold 10.
>
>
>
> From: tccrockets-bounce@xxxxxxxxxxxxx
> [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Richard King
> Sent: Tuesday, February 28, 2012 9:24 PM
> To: tccrockets@xxxxxxxxxxxxx
> Subject: [tccrockets] Re: DA
>
> There will always be people that want a shirt. I always get one or two......
> We had too many small sized last year and could have used a few more XXL as
> you stated. I think we have the numbers dialed in?
>
> RK
>
>
> ----- Original Message -----
> From: Rob Diehl
> To: tccrockets@xxxxxxxxxxxxx
> Sent: Tuesday, February 28, 2012 9:09 PM
> Subject: [tccrockets] DA
>
> Want t-shirts again?
>
> I can start looking for artwork if we want to do them again.
>
> This year I will order more XXL and fewer small sizes. Our group seems to be
> expanding if you know what I mean…
>
> Rob
Other related posts:
