Hi Kevin,
Yes, I flew a CTI M1401 5 grain motor. I’ll send you the flight data off chat.
Greg
On Jul 15, 2017, at 8:34 PM, kevinkal@xxxxxxxxxxx wrote:
Greg,
Was that your Frenzy XL today? If you don't mind, I'd like to see your
flight data as well.
I recall it was 30 lbs on the pad? What was the motor again?
I'll use the data to tweak my OpenRocket model for my Frenzy XL project.
Thanks,
Kevin
-----Original Message-----
From: James Dougherty <jafrado@xxxxxxxxx <mailto:jafrado@xxxxxxxxx>>
To: tccrockets <tccrockets@xxxxxxxxxxxxx <mailto:tccrockets@xxxxxxxxxxxxx>>
Sent: Sat, Jul 15, 2017 6:45 pm
Subject: [tccrockets] Re: Analysis opions
Sheared it! Need a rubber hose piece for the shock cord/airframe junction
Can't wait to see flight data from you and Greg!!!
Lets see ...
Sent from my iPhone
On Jul 15, 2017, at 6:09 PM, JAMES FRANCO <aldocyber3@xxxxxxx
<mailto:aldocyber3@xxxxxxx>> wrote:
So today I flew and had a deployment mishap.
Recovered the rocket in two parts. The main and nosecone at one landing zone,
and the booster & payload at another landing zone. The interesting thing is
the main shock cord sheared. But the drogue shock cord zippered into the
booster. The main cord is definitely broke from force, not from burnt from
ejection charge. I'm going look at all the data from the electronics later
tonight. What do you think happened?
Jimmy F.
TRA 12524
L3