JUST CRAP IN THE CARB.... HOW OFTEN DO I DO THAT??? i will try the carb cleaner then tonight hopefully it's that and not any jetting problems because that carb is a pita to take off ---------------------------------------- > Date: Thu, 28 Aug 2008 09:19:31 -0500 > From: evilscientistboo@xxxxxxxxxxxxx > To: tcb@xxxxxxxxxxxxx > Subject: [tcb] Re: what's going on with this (vacuum leak or what) > > > Just use some spray carb cleaner, not starting fluid since it's more volatile. > > I'd also just check to make sure the idle jet isn't plugged as well. You > could have some crap in the carb. > > -----Original Message----- >>From: Brian Denning >>Sent: Aug 28, 2008 7:59 AM >>To: tcb@xxxxxxxxxxxxx >>Subject: [tcb] Re: what's going on with this (vacuum leak or what) >> >> >>new plugs a month and a half ago...gapped according to the bently. last time >>i replaced them i took them to my carb guy and he said perfect then did the >>little french kiss the fingers thing >> >>guess i'll be buying some starter fluid on my way home tonight and trace down >>that leak >>________________________________ >>> Date: Thu, 28 Aug 2008 05:55:06 -0700 >>> From: bugcollections@xxxxxxxxxxxxx >>> Subject: [tcb] Re: what's going on with this (vacuum leak or what) >>> To: tcb@xxxxxxxxxxxxx >>> >>> Think you are on the right track, i.e., fuel or vacum: But what do the >>> spark plugs look like and when did you last replace them? >>> >>> --- On Thu, 8/28/08, Brian Denning wrote: >>> From: Brian Denning >>> Subject: [tcb] what's going on with this (vacuum leak or what) >>> To: tcb@xxxxxxxxxxxxx >>> Date: Thursday, August 28, 2008, 7:32 AM >>> >>> yesterday i replaced points, condensor, cap and rotar. the points were >>> clearly burned. >>> >>> the bus is acting as if it's loading up and dieing...i have to stay on the >>> throttle a little bit to keep it running, it pops and sputters when i reach >>> any respectable rpm while driving too. >>> >>> i've checked risers, i have brand new intake boots on it, and i checked >>> torque on teh weber. >>> >>> what does that leave? >>> >>> compression? i hope that isn't the problem >>> >>> any suggestions. >>> >>> points are gapped correctly. >>> >>> oh, also, when i adjust timing fast or slow it doesn't really affect how >>> fast the motor runs. >>> >>> ________________________________ >>> Talk to your Yahoo! Friends via Windows Live Messenger. Find Out How >> >>_________________________________________________________________ >>Get ideas on sharing photos from people like you. Find new ways to share. >>http://www.windowslive.com/explore/photogallery/posts?ocid=TXT_TAGLM_WL_Photo_Gallery_082008 > > _________________________________________________________________ Be the filmmaker you always wanted to be—learn how to burn a DVD with Windows®. http://clk.atdmt.com/MRT/go/108588797/direct/01/