dang Will, you KNOW yer stuff! --- On Thu, 8/28/08, Will Wood <evilscientistboo@xxxxxxxxxxxxx> wrote: > From: Will Wood <evilscientistboo@xxxxxxxxxxxxx> > Subject: [tcb] Re: what's going on with this (vacuum leak or what) > To: tcb@xxxxxxxxxxxxx > Date: Thursday, August 28, 2008, 10:01 AM > Fuel Filters help but all it takes is a very, very small > piece of rust or dirt and your idle circuit will be plugged. > This results in hesitation and crappy running up to when > your main jet takes over. > > You have 4 "circuits" in a carb. > > idle, progression, main and enrichment. > > the idle/progression circuits are governed by the idle jet > which has the smallest jet hole in it. Typically less than > .7mm in diameter. That's why small debris can cause you > grief. > > Your mixture screw just governs the idle circuit when the > engine is at idle, when you get on the throttle, the idle > jet supplies fuel via a series of holes in the venturi path. > During this time the engine isn't pulling enough air to > activate the main jet. Typically your idle jet can govern > your fuel delivery in speeds up to 40-50mph in 4th gear. > > I found crap in the idle jets of the submarine bus last > year at TP4 and the owner said the performance was much > improved. > > > > -----Original Message----- > >From: Brian Denning <i_am_cool_fred@xxxxxxxxxxx> > >Sent: Aug 28, 2008 9:32 AM > >To: tcb@xxxxxxxxxxxxx > >Subject: [tcb] Re: what's going on with this > (vacuum leak or what) > > > > > >JUST CRAP IN THE CARB.... > > > > > >HOW OFTEN DO I DO THAT??? > > > >i will try the carb cleaner then tonight > > > >hopefully it's that and not any jetting problems > because that carb is a pita to take off > >---------------------------------------- > >> Date: Thu, 28 Aug 2008 09:19:31 -0500 > >> From: evilscientistboo@xxxxxxxxxxxxx > >> To: tcb@xxxxxxxxxxxxx > >> Subject: [tcb] Re: what's going on with this > (vacuum leak or what) > >> > >> > >> Just use some spray carb cleaner, not starting > fluid since it's more volatile. > >> > >> I'd also just check to make sure the idle jet > isn't plugged as well. You could have some crap in the > carb. > >> > >> -----Original Message----- > >>>From: Brian Denning > >>>Sent: Aug 28, 2008 7:59 AM > >>>To: tcb@xxxxxxxxxxxxx > >>>Subject: [tcb] Re: what's going on with > this (vacuum leak or what) > >>> > >>> > >>>new plugs a month and a half ago...gapped > according to the bently. last time i replaced them i took > them to my carb guy and he said perfect then did the little > french kiss the fingers thing > >>> > >>>guess i'll be buying some starter fluid on > my way home tonight and trace down that leak > >>>________________________________ > >>>> Date: Thu, 28 Aug 2008 05:55:06 -0700 > >>>> From: bugcollections@xxxxxxxxxxxxx > >>>> Subject: [tcb] Re: what's going on > with this (vacuum leak or what) > >>>> To: tcb@xxxxxxxxxxxxx > >>>> > >>>> Think you are on the right track, i.e., > fuel or vacum: But what do the spark plugs look like and > when did you last replace them? > >>>> > >>>> --- On Thu, 8/28/08, Brian Denning wrote: > >>>> From: Brian Denning > >>>> Subject: [tcb] what's going on with > this (vacuum leak or what) > >>>> To: tcb@xxxxxxxxxxxxx > >>>> Date: Thursday, August 28, 2008, 7:32 AM > >>>> > >>>> yesterday i replaced points, condensor, > cap and rotar. the points were clearly burned. > >>>> > >>>> the bus is acting as if it's loading > up and dieing...i have to stay on the throttle a little bit > to keep it running, it pops and sputters when i reach any > respectable rpm while driving too. > >>>> > >>>> i've checked risers, i have brand new > intake boots on it, and i checked torque on teh weber. > >>>> > >>>> what does that leave? > >>>> > >>>> compression? i hope that isn't the > problem > >>>> > >>>> any suggestions. > >>>> > >>>> points are gapped correctly. > >>>> > >>>> oh, also, when i adjust timing fast or > slow it doesn't really affect how fast the motor runs. > >>>> > >>>> ________________________________ > >>>> Talk to your Yahoo! Friends via Windows > Live Messenger. Find Out How > >>> > >>>_________________________________________________________________ > >>>Get ideas on sharing photos from people like > you. Find new ways to share. > >>>http://www.windowslive.com/explore/photogallery/posts?ocid=TXT_TAGLM_WL_Photo_Gallery_082008 > >> > >> > > > >_________________________________________________________________ > >Be the filmmaker you always wanted to be—learn how to > burn a DVD with Windows®. > >http://clk.atdmt.com/MRT/go/108588797/direct/01/