Shouldn't you be able to undo the moustache bar and just let the engine tip down for access? ----- Original Message ----- From: "Gerald Livingston" <gerald.tcb@xxxxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Thursday, June 18, 2009 10:55:57 PM GMT -06:00 US/Canada Central Subject: [tcb] Re: type IV fan/pulley Yes, but not easily. Take the tools required to drop the engine just in case. shirley hall wrote: > the squirrel cage fan on the end of the crank..... > do any of you know if the fan can be removed without pulling the engine? > can it be done by just removing the surrounding sheet metal? > > I put my 914 motor in my 72 bus. I kept the fan housing from the bus > but the fan/pulley was the one on the 914. I've been hearing a muffled > knocking noise and after a compression test that didn't show any > problems, I ran the motor a while to listen again. I took off the > timing track and could see where the fan is rubbing the housing when I > rotated the motor. hopefully thats the muffled knocking i'm hearing. > > so, I want to change the fan out but the bus is miles away and i can't > go out to the garage to see if the exchange is possible without pulling > the motor. > > thanks, > shirley >