Hey Lonnie, Yes I would like the stabilzer bar, thanks! I get with you this week. Shirley >>> bergmanfamily@xxxxxxxxxxxxx 10/26/05 10:12 AM >>> I read the three posts to the typeII list Dan sent links to and learned a lot. And after thinking about switching torsion bars, figured that could end up to be a very bad thing. Shirley, I'm pretty sure the front stabilizer bar from a 68 is the same. I have a front stabilizer bar from a 71 hanging on the fence by garage if you want it. Lonnie -----Original Message----- From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of Sammie Smith Sent: Wednesday, October 26, 2005 8:34 AM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: tecnical stuff A lot. One spline movement is probably way too much. On a swing axle one spline on the outer probably increases height of bus by 2" or more and increases camber probably 10 degrees. Don't switch bars. Sammie