made sure it was pushed down all the way put the cap back on and it is still doing it. will lube it up tomorrow like will said. not my number 1 concern right now, i am trying to mainly focus on the windshield area and the floor right now. i am taking dan's advice and doing everything that needs to be done while i ait is out of commission (no heat and it's cold out)
From: wuzmop@xxxxxxx Reply-To: tcb@xxxxxxxxxxxxx To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: squeky squeky squeky Date: Tue, 14 Nov 2006 14:08:19 -0500The cap is on the right way, I assume? You know it has that notch in it. Are you possibly pinching the condensor wire keeping the cap from sitting flush? Are both cap clamps snug? Positive the rotor is seated all the way down?-----Original Message----- From: i_am_cool_fred@xxxxxxxxxxx To: tcb@xxxxxxxxxxxxx Sent: Tue, 14 Nov 2006 12:52 PM Subject: [tcb] Re: squeky squeky squekywell the cap hasn't cracked yet but i can clearly see a gouge where it is hitting>From: Will Wood <evilscientistboo@xxxxxxxxxxxxx> >Reply-To: tcb@xxxxxxxxxxxxx >To: tcb@xxxxxxxxxxxxx >Subject: [tcb] Re: squeky squeky squeky >Date: Tue, 14 Nov 2006 12:48:11 -0600 (GMT-06:00) > >Lube the shaft.. >>At the top of your distributor rotor shaft you have a felt pad put some oil >on it. Not WD40 on that felt.. Use like 3-1 or Marvel Mystery Oil etc.>>Take a can of WD40 and spray underneath the contact point plate. This >will help lubricate the sprints and the weights and the pivots.>>Your cap shouldn't be contacting the rotor directly, there's a small airgap >there. If it is hitting it it'll cause the cap to crack.> >-----Original Message----- > >From: Brian Denning <i_am_cool_fred@xxxxxxxxxxx> > >Sent: Nov 14, 2006 12:08 PM > >To: tcb@xxxxxxxxxxxxx > >Subject: [tcb] squeky squeky squeky > >> >so my bus runs great drives great, a little windy right now though, >starts> >great. but, i hear a squeky squeky squeky noise comming from the> >distributor. and i think i no what it is but how is it happening and what >to > >do about it? the rotar thingy is rubbing against the number 2 area of the > >distributor cap. it does it when i put my extra cap on as well. and it >does> >it with the extra rotar as well also. what should i do about this is it> >going to hurt anything? i drove it to the conway show last month and it >did > >it the whole tiime. seems to go away at higher rpm's though. (like >highway> >speed rpms) > > > >_________________________________________________________________> >Add a Yahoo! contact to Windows Live Messenger for a chance to win a free> >trip!> >http://www.imagine-windowslive.com/minisites/yahoo/default.aspx?locale=en-us&hmtagline> > > > > > _________________________________________________________________Get FREE company branded e-mail accounts and business Web site from Microsoft Office Live http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/________________________________________________________________________Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.
_________________________________________________________________Get today's hot entertainment gossip http://movies.msn.com/movies/hotgossip?icid=T002MSN03A07001
