[tcb] Re: need a master cylinder resevior for a 1978-1983 rabbit
- From: "Will Wood" <evilscientistboo@xxxxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Mon, 1 May 2006 07:39:21 -0500
I should have grabbed all those reservoirs that were at Wilson's.. LOL
Hey Neil, you have an early type 3 ignition switch in that stash of yours?
-----Original Message-----
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Neil McGlothin
Sent: Monday, May 01, 2006 1:36 AM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: need a master cylinder resevior for a 1978-1983 rabbit
Speakin' of the 67 dual circuit, I still have one for
sale!
--- Will Wood <evilscientistboo@xxxxxxxxxxxxx> wrote:
>
> You can use the reservoir on a late bay master
> cylinder on an Early Type 2.
> Then you have the fill hole lining up with the
> access hole under the floor.
>
> *it* was cheaper than installing a 67 dual circuit.
> I think there's
> a little market force at work here. I now know I'll
> go and
> snag these buggers out of pick a part yards.
>
>
>
> -----Original Message-----
> From: tcb-bounce@xxxxxxxxxxxxx
> [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
> Of Lonnie Bergman
> Sent: Sunday, April 30, 2006 2:01 PM
> To: tcb@xxxxxxxxxxxxx
> Subject: [tcb] Re: need a master cylinder resevior
> for a 1978-1983 rabbit
>
> Are you putting the rabbit master cylinder on a
> splitty?
>
> -----Original Message-----
> From: tcb-bounce@xxxxxxxxxxxxx
> [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
> Of Will Wood
> Sent: Sunday, April 30, 2006 12:56 PM
> To: tcb@xxxxxxxxxxxxx
> Subject: [tcb] Re: need a master cylinder resevior
> for a 1978-1983 rabbit
>
> Yikes I just ordered two of these three months
> ago..!
>
> $89 for this one
>
http://www2.cip1.com/ProductDetails.asp?ProductCode=VWC%2D867%2D611%2D301%2D
> B
>
> Time to go bone yard hunting at pick a part.. :-(
>
>
>
>
> -----Original Message-----
> From: tcb-bounce@xxxxxxxxxxxxx
> [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
> Of singlecabboy
> Sent: Sunday, April 30, 2006 12:32 PM
> To: tcb@xxxxxxxxxxxxx
> Subject: [tcb] Re: need a master cylinder resevior
> for a 1978-1983 rabbit
>
> Will , I found the master cycider , where did you
> find
> the resevior for the Rabbiton cip1?
>
> --- Will Wood <evilscientistboo@xxxxxxxxxxxxx>
> wrote:
>
> > CIP1 sells them for $50.
> >
> >
> > -----Original Message-----
> > From: tcb-bounce@xxxxxxxxxxxxx
> > [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
> > Of singlecabboy
> > Sent: Sunday, April 30, 2006 3:28 AM
> > To: tcb
> > Subject: [tcb] need a master cylinder resevior for
> a
> > 1978-1983 rabbit
> >
> > found on e at Bus Depot for 102.00 (German ) ouch!
> > know of any water cooled sites?
> >
> >
> >
> >
> >
>
>
> Paul Smith
> www.23window.com/thezone
> Praise The Lowered
> T.C.B.
> H.B.B.
>
>
>
>
>
>
>
>
>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Other related posts:
