[tcb] Re: mike everet
- From: "Denis" <coocoo@xxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Tue, 4 Aug 2009 11:20:45 -0500
No. He is still officially lowered, and I like him that way, but I was working
on how not to have the front tires rub without narrowing the beam. Along with
some other tweaks, I raised the settings on the springplates and maybe brought
him up 1/2 inch. It did pretty much eliminate the rubbing.
----- Original Message -----
From: Eric Woodall
To: tcb@xxxxxxxxxxxxx
Sent: Tuesday, August 04, 2009 10:35 AM
Subject: [tcb] Re: mike everet
Did you take the drop spindles off?
Seems like it was still lowered the last time I saw it (him) at the Classic?
Denis wrote:
I raised Murray using the springplates. I have a little camber, but the
tires are wearing smoothly. It may change when you load the bus and get in it.
Springplates are easy and if you don't like it, you can put it back and it's
free.
----- Original Message -----
From: Brian Denning
To: tcb@xxxxxxxxxxxxx
Sent: Tuesday, August 04, 2009 10:16 AM
Subject: [tcb] Re: mike everet
i meant 205/75r15's
just reread my post, sorry, i'm so used to typing 14 thanks to being in
bay hell
--------------------------------------------------------------------------
From: i_am_cool_fred@xxxxxxxxxxx
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: mike everet
Date: Tue, 4 Aug 2009 10:07:37 -0500
from all my readings it's looking more and more like fred will be getting
205/75r15's
i was going to do 215/75r15 but i really plan on going offroad with this
thing and the thought of the tires getting into those perfect rear fender lips
just kills me a bit inside.
after discussing with mike through email it was all coil overs, he says
it rides good, but again, after much reading i don't think i'd want to go that
route
205/75r14's are about 2" bigger than stock, that's what hershey now has
on him thanks to his new owner, and it looks bad ass. so that's what i shall do
to fred.
sucks, i wanted to raise him, but there's no good way of doing it without
getting alot of positive camber out back, which woudl make it a bit squirelly
on the highways.
--------------------------------------------------------------------------
Date: Tue, 4 Aug 2009 10:00:07 -0500
From: evil.scientist.boo@xxxxxxxxx
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: mike everet
The tires were a lot of it but the spring plates were cranked up quite a
bit too.
Too bad you couldn't do an easy body lift on a bus like you can on a bug
to get more tire clearance.
-- Sent from my Palm Pre
--------------------------------------------------------------------------
Eric Woodall wrote:
..and Mike's bus isn't that much taller than stock.
Maybe about 2 inches, which was gained by tires.
w.wood wrote:
really? Wow, I guess all those years of fixing up cut wheel wells
didn't teach me much about redux boxes then. I don't know much about yours
and it could have been modified. If you have 46mm axle nuts and you're
planning to run big tires I'd suggest getting a set from a 55-63 bus which have
lower gearing for the taller tires you sound like you'll need. You could
always cut the fender wells out and go 60's retro with fiberglass fender
flares. That and a set of air scoops would look totally mod for the new
millennium.. ;-)
Also since presumably yours is a 58 you should read the crazy 8's
thread on thesamba before you make mods. You may have something rare there.
I realize under the rust you may be expecting Doubloons but I'd bet just rot..
Then again you could always get a Ford chassis and put your bus on top
of that. Wait, that's been done
http://www.thesamba.com/vw/forum/viewtopic.php?t=358633&start=0
But at least you could get parts at the local ArkaCan O'Reilly's or
Canada Tire and keep it running.
The point I'm trying to make here Brian is that if you're going to
modify a 51 year old bus you should think about the end game and the
serviceability. If it's going to be something for fun then you want
contemporary components that are relatively easy to get. I'll also get a
*gasp* from that from a few folks on here on that statement but if you've
priced stock 1600 parts lately, the ones that aren't made in Taiwan, then
you'll know what I mean. Redux gear parts aren't exactly being made by the
bucket full anymore, neither are stub axles for RGBs either. If you want real
fun, try buying Barndoor parts sometime.. So if you're committed to modify,
go big or go home. Don't try to modify 50 year old parts without expecting the
requisite problems and pocket book gouge..
To illustrate the problem, after futzing around with a Type 3 this
weekend, I'm having it hauled to Doug's for some more work.. and that's for my
kid for High School.. Why? After putting new heads on it, new tubes it
wouldn't mate back up to the transaxle. After re-aligning the clutch 3 times
to see if I could get it to seat, I said "f* it." But then again CB 044 heads,
dual 44 IDFs and a 1700 Kennedy may be fighting me somewhere but oh well... It
needs some other things too, so might as well whip out the checkbook....
fix the z-bar.. new wheel cylinders.. oh well.
Right now I'm thinking Honda Accords look pretty damn good. Maybe a
Prius.. in Pink.. Naw, he's cadet commander in NJROTC and that'll be against
the don't ask don't drive a Prius policy.
On Mikes bus he went with some very tall tires and wound up denting the
lower portion of his dog legs and his rear rockers. A lot of the height he
gained was by the tires as far as I recall.
On Mon, Aug 3, 2009 at 8:47 PM, Brian Denning
<i_am_cool_fred@xxxxxxxxxxx> wrote:
will, i know i'm new to pre 67, but i'm pretty sure they all have
redux. boxes from the factory ;)
including both of mine
----------------------------------------------------------------------
Date: Mon, 3 Aug 2009 20:15:17 -0400
Subject: [tcb] Re: mike everet
From: evil.scientist.boo@xxxxxxxxx
To: tcb@xxxxxxxxxxxxx
What??? This sounds like ArklaCan engineering here?
Get a set of redux boxes and tall tires, it'll go up high enough.
THe coil overs from what I recall was in the front end.
On Mon, Aug 3, 2009 at 12:11 PM, Brian Denning
<i_am_cool_fred@xxxxxxxxxxx> wrote:
the only raising busses thread is the one kevin did and i'm not
gonna cut my tranny hanger to do a 2" tranny drop
--------------------------------------------------------------------
Date: Mon, 3 Aug 2009 08:18:23 -0700
From: bugcollections@xxxxxxxxxxxxx
Subject: [tcb] Re: mike everet
To: tcb@xxxxxxxxxxxxx
Brian: I have 2 phone #s for him: Home 214-350-5373, cell
214-837-1379. Will not guarantee that those or good. They are rather old and
I haven't called him in a long time. If they do not work you might call Jack
Wenk at Black Gold Imports in Arlington and ask him either how Mike did it or
how to get in touch with Mike. Phone # at Black Gold is 817-633-1135 I think.
I do know that Mike did not do any major suspension modifications to his bus.
I think just coil overs and larger tires. There is also a thread on the samba
about raising busses.
Sammie
--- On Mon, 8/3/09, Brian Denning
<i_am_cool_fred@xxxxxxxxxxx> wrote:
From: Brian Denning <i_am_cool_fred@xxxxxxxxxxx>
Subject: [tcb] mike everet
To: tcb@xxxxxxxxxxxxx
Date: Monday, August 3, 2009, 9:25 AM
anyone have any kind of email or samba name on this guy???
mike hayes suggested i talk to him about how he got his bus raised using coil
overs, would like the same effect on the 58, or even better, any of you know
how i can get the bus up about an inch without to much drastic work???
------------------------------------------------------------
Windows Live™: Keep your life in sync. Check it out.
--------------------------------------------------------------------
Windows Live™: Keep your life in sync. Check it out.
--
My Email Moniker
http://www.findinternettv.com/Video,item,1570570433.aspx
----------------------------------------------------------------------
Windows Live™: Keep your life in sync. Check it out.
--
My Email Moniker
http://www.findinternettv.com/Video,item,1570570433.aspx
--------------------------------------------------------------------------
Express your personality in color! Preview and select themes for
Hotmail®. Try it now.
--------------------------------------------------------------------------
Get back to school stuff for them and cashback for you. Try Bing™ now.
Other related posts:
