[tcb] Re: hp
- From: Mark Sawyer <mechmark@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Tue, 22 Apr 2008 13:29:32 -0700 (PDT)
I would say so. I will see if I can find the chart again for figuring hp.
sammie smith <bugcollections@xxxxxxxxxxxxx> wrote: So except for the milder
cam and the smaller carbs about the same engine. So do you think I am in the
ball park with an estimate of 110 hp?
Mark Sawyer <mechmark@xxxxxxxxxxxxx> wrote: Engine configuration:
90.5 x 78 stroke
044 super mag head
Scat C25 cam
Dual 40 IDF Webers
windage tray
solid rocker shafts,
stock rockers,
chromoly push rods
ported and polished.
Full flow exhaust.
horsepower is a calculated estimate at 140hp
Also running a Kennedy 3500 lb pressure plate with solid clutch disc. (hard
on the knee, not a clutch for traffic)
sammie smith <bugcollections@xxxxxxxxxxxxx> wrote:
Mark Sawyer: We were talking about a 2007cc stroker motor at the Classic
and our conversation got interupted and I forgot what you said about
configuration and horse power.
Exactly how did you have this engine set up in terms of heads, cam, and carbs
and did you dyno it at the crank or the wheels, and how much horse power did
you say that it turned out?
I'm trying to get a guess ti mate of how much mine is turning with an Engle
110, Weber 34s and CB 044 heads. My guess right now is 110-120.
Sammie
Other related posts:
