[tcb] Re: how do you get the thingee's out of the case
- From: sammie smith <bugcollections@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Mon, 28 Apr 2008 14:28:35 -0700 (PDT)
"In a pinch I have used vice grips" has got to be an oxymoron. That's almost
as funny as Denis' Monday.
Mark Sawyer <mechmark@xxxxxxxxxxxxx> wrote: That's exactly how I would explain
and and how I get the studs out as well. In a pinch I have used Vice Grips.
sammie smith <bugcollections@xxxxxxxxxxxxx> wrote: Have you thought of two
nut jam method. Uh how do explain this. Run one nut on, run another nut on.
Tighten them together. Screw out the inner nut. Will remove a stud everytime.
Mark or Will may have a better way to explain to a VW nut how to use the jam
nut method to remove a stud. I just thought every VW nut knew how to use nuts
for studs. Or is that a VW stud using nuts. Anyway, you get the meaning.
Trey Jung <treyjung@xxxxxxxxxxx> wrote: got a 1600 case that I am
bumping into all the time b/c it has the rods sticking out of the case that the
cylinders slide onto (heads bold on to them I think too)..... is there a secret
to getting these things out of the case. ( I want to put the case on a shelf
but these things make too wide to fit... I tried a pair of pliers but they seem
to be really in the case.
Thanks
Other related posts:
