Yea, I did the fill them up with oil test and no leaks but when I shoot compress air into the intake and exhaust ports - I get a little bubbles coming from one of the exhaust valves - (I have to really shoot some air in them to get the bubbles. Anyone ever lapped their own vales? Hard? Trey _____ From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Jenkins Sent: Friday, January 02, 2009 8:46 PM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: head rebuilding I have a shop in Humble that has doing my for 10 years ,I have 2 sets on the shelf 100.00 per head. _____ From: treyjung <treyjung@xxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Friday, January 2, 2009 7:58:39 PM Subject: [tcb] Re: head rebuilding Now that I've thought about it I think I just need to lap the valves - thanks _____ From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of thingmon@xxxxxxxxx Sent: Friday, January 02, 2009 5:45 PM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: head rebuilding Smith Foreign can. Donnie's on the east side of Houston off 225. I think George Karacostas can too. He's down in Hitchcock. Gekko probably can too. He's around 288 and 8. You might post up on the Aircoolers or DLK sites to see if anyone has recent experiences to relate. Good luck. _____ From: treyjung <treyjung@xxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Friday, January 2, 2009 3:32:46 PM Subject: [tcb] head rebuilding Anyone know of someone that rebuilds heads close to Houston ? I have a set of heads that only have about 2,000 miles on them - they need to be checked out. I think one of the exhaust valves leaks. I blew air in it this morning and got a few bubbles. Thanks, Trey. ;