[tcb] Re: dropping the back
- From: Brian Denning <i_am_cool_fred@xxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Mon, 18 Feb 2008 09:24:42 -0600
40 outers 44 inners...and then it gives degrees of drop but no where does it
give inches on outers or inners, it says all this garbldy goop about 8 degrees
and 30 min. and 10 degrees and 8 min. or some nonsense like that but never does
it say it in inches or meters or anything.
Date: Mon, 18 Feb 2008 07:20:09 -0800
From: bugcollections@xxxxxxxxxxxxx
Subject: [tcb] Re: dropping the back
To: tcb@xxxxxxxxxxxxx
I would have to go look in the book to see how much different there is between
inner and outer. They are different, but not that much and 3 splines is a lot.
You are not going to be able to tell till you get the engine in and roll the
bus till the suspension settles.
Brian Denning <i_am_cool_fred@xxxxxxxxxxx> wrote: it was 3 inners
though...i have to match the front which, now the top is about chin high on me.
Date: Mon, 18 Feb 2008 07:13:47 -0800
From: bugcollections@xxxxxxxxxxxxx
Subject: [tcb] Re: dropping the back
To: tcb@xxxxxxxxxxxxx
That should lower the bus a BUNCH! Maybe too much if you really went down 3
splines.
Brian Denning
<i_am_cool_fred@xxxxxxxxxxx> wrote: i got the left side done yesterday
on the bus...i have a question though, the outersplines were all gobbled up and
i couldn't get them to align so i marked and measured the torsion bar and i
pulled it out got the spring plate on and then i put the torsion bar back on
turning the inner splines 3 clicks instead of the outers two...how much should
that lower the bus? it only went down an inch and a half but i don't have a
motor in it and it hasn't rolled back and forth or anything allowing the
suspension to "settle" as chad says. how much more do you think it will drop
after it settles? it looks awesome and would be even more awesome if it would
come down like an inch or so
(which it should with the motor in it.
how much will settling allow it to come down?
i'm doing the right tonight and hopefully stabbing the motor this weekend
it's almost ready for the road again, just have to measure and get some smaller
than stock shocks for the front
Shed those extra pounds with MSN and The Biggest Loser! Learn more.
Need to know the score, the latest news, or you need your Hotmail®-get your
"fix". Check it out.
_________________________________________________________________
Shed those extra pounds with MSN and The Biggest Loser!
http://biggestloser.msn.com/
Other related posts:
