Did you order the aerosol or find it locally (Lowes/Home Depot)? Also, did you spray the door, the stripping, or both? ----- Original Message ---- From: sammie smith <bugcollections@xxxxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Tuesday, April 22, 2008 1:25:56 PM Subject: [tcb] Re: cargo doors and seals Jeff: The best thing I have found is the 3m trim adhesive that comes in an aerosol can. If you need the part # let me know and I will go look. ATX BUS <atx_bus@xxxxxxxxx> wrote: Any one have a suggestion on an adhesive for the cargo door weather stripping? I was thinking an indoor/outdoor silicone material from a hardware store should work. Also I am replacing some of the rubber seals engine compartment, doors. If there are any tricks let me know Thanks in advance for the suggestions. Jeff Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ