That's it. If it was bolted it would be a barndoor to early 55. Also it would work well on a Kubel Sent via BlackBerry from T-Mobile -----Original Message----- From: sammie smith <bugcollections@xxxxxxxxxxxxx> Date: Wed, 9 May 2007 18:20:36 To:tcb@xxxxxxxxxxxxx Subject: [tcb] Re: bus tranny Not sure exactly what you mean by the outer axle tube reinforcement, but if you mean the manner in which the tube is attached to the inner plate of the redux box, it is pressed in and set with the pin just as in the later tunnel case tranny. evilscientistboo@xxxxxxxxxxxxx wrote: Can you describe the outer axle tube reinforcement at the RBG? Is it pressed on or bolted? Sent via BlackBerry from T-Mobile -----Original Message----- From: sammie smith Date: Wed, 9 May 2007 17:17:58 To:tcb@xxxxxxxxxxxxx Subject: [tcb] bus tranny In the process of salvaging busses today I picked up a split case bus tranny complete through redux boxes. This is a SPLIT case tranny, not tunnel case, which is correct I believe for an early 59 and earlier bus. Maybe even a barn door. Anyway, stamped #';s are 2A1732461. Peter, Will, any help on value if any and does any one have any need for it? And is there any way to id year from the #?