I had to replace, all but one was shot. On Nov 16, 2007, at 8:40 PM, Brian Denning wrote:
was this a i have to do it thing for you dan or a while i'm at it??? i don't know if they need to be replaced or not but i figured what the hell while the beam is out i might as well do it...but then chad said not to do it if it doesn't need it for the same reason you are saying...guess if i decide they need to be replaced it will be cheaper to buy the torsion housings that already have them in it from wagenswest for $190 insteaed of attempting to do it my self...doesn't sound like i can save any money doing it myself.> From: danandkatrinamartin@xxxxxxx > Subject: [tcb] Re: ball joints??? > Date: Fri, 16 Nov 2007 15:52:58 -0600 > To: tcb@xxxxxxxxxxxxx > > Sound easy enough. > Remember Brian has a early baywindow bus.> I had a hard time finding a place in Houston that was willing to try.> They tried, ( they came highly recommended, famous around here for> being the best front end guys around, with a very impressive shop set> up.) gave up and I wound up having to take to a shop I did not want > to use. It wound up costing about 700.00.> I think the tool used on the press is the key, what I was told anyway. > Heir Schmidt has the tools he got from a VW dealer, he told me he had> the only one around. > Ronnie had better luck finding a local shop. > I also got the ball joints from a local parts place, Heir Schmidt> said the were the wrong size, so I had to buy another set from him. I> think that proves there is more than one size. > A lot of good info here: > http://www.type2.com/library/suspens/balljoin.htm > and > http://www.type2.com/library/suspens/ballrem.htm > Good luck! > > On Nov 16, 2007, at 1:41 PM, Chuck Blue wrote: >> > Press the old ones out. Press the new ones in. It's pretty basic if> > you have a press. > > ole blue > > ----- Original Message ----- > > From: Brian Denning > > To: tcb@xxxxxxxxxxxxx > > Sent: Friday, November 16, 2007 1:34 PM > > Subject: [tcb] ball joints??? > > > > how hard are they to replace in a bus? recommendations, advice and > > services are appreciated. > > > > keep in mind i have access to a friend who has access to a press > > and is a knowledgeable vw mechanic. ball joints look to be between > > 15 and 27 a peice torsion arms with new joints already installed > > are aroudn 150-195 for all four of them... > > > > suggestions please and tell me how hard they really are. > > > > oh, and the beam will be completely out be replaced when these get > > replaced > > > > Climb to the top of the charts! Play Star Shuffle: the word > > scramble challenge with star power. Play Now! > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.5.503 / Virus Database: 269.15.34/1134 - Release Date: > > 11/16/2007 9:52 AM > > Dan Martin > 1971 VW Bus > H.B.B. > T.C.B. > > http://web.mac.com/danandkatrinamartin > http://ical.mac.com/danandkatrinamartin/Volks32Shows > > > >Climb to the top of the charts! Play Star Shuffle: the word scramble challenge with star power. Play Now!
Dan Martin 1971 VW Bus H.B.B. T.C.B. http://web.mac.com/danandkatrinamartin http://ical.mac.com/danandkatrinamartin/Volks32Shows