Cool, 'preciate it. I'm glad you brought it up, it'll motivate me to redo mine finally. -----Original Message----- From: Eric Woodall <ericthomaswoodall@xxxxxxx> To: tcb@xxxxxxxxxxxxx <tcb@xxxxxxxxxxxxx> Sent: Tue, Oct 12, 2010 12:04 pm Subject: [tcb] Re: Z-bed brackets on firewall? There's a good one on TheSamba I'll send you a pic later Sent from my iPhone On Oct 12, 2010, at 11:57 AM, wuzmop@xxxxxxx wrote: Jeff, can you email me a pic? I've never even seen one, just guessed when I made mine. -----Original Message----- From: Eric Woodall <ericthomaswoodall@xxxxxxx> To: tcb@xxxxxxxxxxxxx <tcb@xxxxxxxxxxxxx> Sent: Tue, Oct 12, 2010 11:48 am Subject: [tcb] Re: Z-bed brackets on firewall? I'll definitely hit you up if I can't find one. Thanks Jeff! Sent from my iPhone On Oct 12, 2010, at 11:30 AM, ATX BUS <atx_bus@xxxxxxxxx> wrote: Eric, I have some brackets to use as a template. They are from a splittie. Jeff From: "wuzmop@xxxxxxx" <wuzmop@xxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Tue, October 12, 2010 9:11:03 AM Subject: [tcb] Re: Z-bed brackets on firewall? Just some steel flat bar crap I found at home depot, riveted in. After 6-7 years it's time for me to revisit my design. -----Original Message----- From: Eric Woodall <ericthomaswoodall@xxxxxxx> To: tcb@xxxxxxxxxxxxx <tcb@xxxxxxxxxxxxx> Cc: tcb@xxxxxxxxxxxxx <tcb@xxxxxxxxxxxxx> Sent: Tue, Oct 12, 2010 7:56 am Subject: [tcb] Re: Z-bed brackets on firewall? Did you make them with some plate steel? Sent from my iPhone On Oct 12, 2010, at 7:33 AM, wuzmop@xxxxxxx wrote: I had to make mine. -----Original Message----- From: Eric Woodall <ericthomaswoodall@xxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Tue, Oct 12, 2010 7:31 am Subject: [tcb] Z-bed brackets on firewall? Not sure what these are called but I need some of those triangular brackets that olt to the firewall and give support to the seat back when in bed mode. Don't are if they are bay or split. nybody have a set they would part with? Eric Sent from my iPhone =