[tcb] Re: Wiper Question
- From: Duncan <whocanduncan1@xxxxxxxxx>
- To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
- Date: Thu, 27 Feb 2014 10:49:50 -0600
Thanks, I will pull out the Bentley and figure out where the second lead
goes to.
On Thu, Feb 27, 2014 at 10:12 AM, Mark Jenkins <marktts88@xxxxxxxxx> wrote:
> I just did a new wiper on my bus and found that there are two power leads
> going to the motor one that turns on the wiper and one that returns it to a
> stoping point after you turn the wiper off check that second power
>
> *From:* Ted Strother <teebug1943@xxxxxxxxx>
> *To:* "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
> *Sent:* Thursday, February 27, 2014 8:50 AM
> *Subject:* [tcb] Re: Wiper Question
>
> Check really close Duncan you may have left a wire off,or it could be in
> the switch it self. TED
>
>
> On Thursday, 27 February 2014, 7:38, Duncan <whocanduncan1@xxxxxxxxx>
> wrote:
> What would cause the wipers nit to return "home" when shutting them off?
>
> Freedom's wipers now stop wherever they are when I shut them off.
>
> Thx for the feedback,
> Duncan
>
>
>
>
>
Other related posts:
