Chris' bus isn't lowered... But, mine is lowered by adjusting the spring plates. I wouldn't get rid of them though. I like them... > How did you lower your bus while keeping the RDs? Did you just re-adjust > your springplates? If you have to pull everything to fix the bearings in > the > RDs, is this your opportunity to get rid of them? > > Maybe this is your oportunity > ----- Original Message ----- > From: "Eric Woodall" <eric@xxxxxxxxxxxxxx> > To: <tcb@xxxxxxxxxxxxx> > Sent: Tuesday, January 02, 2007 10:47 AM > Subject: [tcb] Re: Weekend at Woodalls > > > Yeah, feeling much better. > As for the wheel bearings, I think I have everything to do that job. > But, if the sound is from the bearings inside the reduction boxes, then > that is a whole other can of worms and will require removing axle tubes > (and transaxle to make it easier). > > > >> >> >> I like to go too so I can use Eric's new rivet gun. Plus I think I need >> to >> work on my wheel bearings got some rubbing going on. Let me know what to >> bring for the bus work weekend Eric. Mark maybe before the weekend you >> could come by the house to see if thats my problem so I could order >> parts >> for the "Weekend at Woodalls". >> >> Eric the family is feeling better eh? >> >> >> >> >> Cajun Eskimo >> Christopher Dirksen >> From: "Eric Woodall" >> Reply-To: tcb@xxxxxxxxxxxxx >> To: tcb@xxxxxxxxxxxxx >> Subject: [tcb] Re: Hehr Jalousie Window Restoration Questions. >> Date: Tue, 2 Jan 2007 09:44:22 -0600 (CST) >>>Yeah, it sure does Mark! >>>I am still gathering parts, so when I get that all done and new glass >>> cut >>>I will plan something out... >>>It looks like after I have everything disassembled, it shouldn't be too >>>difficult to get at the rivets with some tools. >>> >>> >>> >>> > Sounds like the beginning of a work weekend at Eric's >>> > >>> > Eric Woodall wrote: Hey everyone, >>> > I know there are some Westy freaks on this list so... >>> > I recently acquired some original jalousie windows (thanks Peter!), >>> and I >>> > have some questions about some different aspects of putting them >>> together. >>> > >>> > 1) Some of the clips that hold the windows in need to be repaced. >>> These >>> > are riveted together, and I am going to need to drill out the rivets. >>> Is >>> > there a certain tool that I should use to put the new rivits in? >>> > >>> > 2) I also need to replace the mesh screen on the screen frames. Is >>> there >>> > some type of window company that should be able to do this? >>> > >>> > I can tell already that this is going to be a lot of work to get 6 >>> working >>> > windows, but it will be soooo nice to have them installed in the bus. >>> > I can't wait! >>> > >>> > >>> > >>> > >>> >>> >>> >> The MSN Entertainment Guide to Golden Globes is here. Get all the >> scoop. > > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.432 / Virus Database: 268.16.2/613 - Release Date: 1/1/2007 > 2:50 PM > > > >