I looked at the images in the gallery from Hazet guy but that isn't where my leak is. mine is coming out of the bottom where the horn wire exits the flat part. ________________________________ From: sammie smith <bugcollections@xxxxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Tuesday, November 22, 2011 2:46 PM Subject: [tcb] Re: Steering Box Rebuild Here you go James. Step by step by Hazet guy on the Samba. And the seal is available from Bus Boys for less than $5. http://www.thesamba.com/vw/forum/album_search.php?search_keywords=Bus+Steering+Box+Seal+Replacement Also, here is the seal http://www.thesamba.com/vw/forum/viewtopic.php?t=124767&highlight=steering+box+seal The Samba is your friend. Sammie --- On Tue, 11/22/11, James Dwan <james_dwan_2000@xxxxxxxxx> wrote: >From: James Dwan <james_dwan_2000@xxxxxxxxx> >Subject: [tcb] Steering Box Rebuild >To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx> >Date: Tuesday, November 22, 2011, 9:21 AM > > >Has anyone had experience rebuilding a steering box on a splitty? Mine is >leaking like a sieve. >I was told by a local mechanic that there is no literature available on the >size of the seals in the box and the best way to do it would be to take it >apart and source the parts after removing them to get measurements. > > >Believe it or not this is the last thing I need done on this Bus to drive it >long distance!