[tcb] Re: Scoop on Adhesives
- From: "Duncan" <whocanduncan1@xxxxxxxxx>
- To: "TCB" <tcb@xxxxxxxxxxxxx>
- Date: Fri, 24 Sep 2010 20:32:52 +0000
I'm replacing the OEM cardboard backing with luan and didn't have enough weight
to cover the entire panel so it is loose in some areas. I would up stapling the
back to be safe.
I can see liquid nail working, too.
-----Original Message-----
From: James Dwan <james_dwan_2000@xxxxxxxxx>
Sender: tcb-bounce@xxxxxxxxxxxxx
Date: Fri, 24 Sep 2010 13:19:37
To: <tcb@xxxxxxxxxxxxx>
Reply-To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Scoop on Adhesives
Do you mean vinyl adhered to particle board? I have found that liquid nails
works well with a couple of clamps. I have used that 3M you mentioned for
carpet
and love the results. I also used some adhesive from these guys:
http://www.secondskinaudio.com/sound-deadening-materials/spray-gun-adhesive.php
----- Original Message ----
From: Duncan <whocanduncan1@xxxxxxxxx>
To: TCB <tcb@xxxxxxxxxxxxx>
Sent: Fri, September 24, 2010 3:01:13 PM
Subject: [tcb] Scoop on Adhesives
3M's 8088 has been highly recommended by many, myself included. Well, I just
redid a door panel using vinyl and it worked, eh, okay. Not great, though. So
with a little research here is what I found out:
8088 is for carpets and fabric.
8090 is for vinyl and plastic trim, including headliners and engine foam.
And 8008 is for rubber window and door molding.
All are 3M products.
There's the poop, er, scoop on glue.
Other related posts:
