cool, denis you have inspired me to do the same thing. only i am going to
use por 15 because i have some really thin spots in the back of the fabubus.
i have all the seats out now and am now working on sanding the surfaces and
busting out loose rust. can't wait to see the before and afters.
From: "Denis Dodson" <coocoo@xxxxxxx> Reply-To: tcb@xxxxxxxxxxxxx To: <tcb@xxxxxxxxxxxxx> Subject: [tcb] Rust Bullet Date: Mon, 5 Dec 2005 08:56:51 -0600
I don't have any heat in the garage where I work on the bus and the directions say not to apply it below 50 degrees, and my parabolic heater, roaring all day only brought the temp up to 51. So Saturday the temps here skyrocketed into the sixties and it was warmer outside than in, so I moved the bus into the sun. While it was completely still when I started spraying, immediately after I began the wind picked up enough to blow around the thin plastic I was using to mask.
But I got it done and it does look good and it dried by evening. Dan will have the before and after pics.
