So, is Lu your husband Jane? Never met ya'll. It's a pink 23 right? Jane Cananza wrote: > Paul, can't thank you enough for selling the '66 to Steve and Sharon > and doubly thanks to Sharon and Steve for selling it to Lu. He loves > that bus and we had the best time on our trip to CO with S/S. Even > the breakdows were a lot of fun at least for Sharon and me. Can't > wait for the next road trip. > > > > > ------------------------------------------------------------------------ > *From:* singlecabboy <sealingwaxred@xxxxxxxxx> > *To:* tcb@xxxxxxxxxxxxx > *Sent:* Wednesday, August 19, 2009 11:02:34 PM > *Subject:* [tcb] Re: Question about painting my 23 Window > > My 66 that I sold to Steve and Sharon and they sold to Lu and Jane and > just got back from Colorada in it had a green under side that was as > clean as a baby's hieny . the inside floors and and walls and > everything was the same green from the factory. But I think that it > was a m code thing.You gotta love those clean Nevada busses.Still > kickin my ***ss for selling it. > Paul Smith > > 2009 Zone Tour 1999-2009 ,10 years of Trucking > > H.B.B > T.C.B > Transporters at the Point 6 October 9,10,and 11, 2009"Love all,trust > a few,Do wrong to none" > > > --- On Wed, 8/19/09, sammie smith <bugcollections@xxxxxxxxxxxxx > <mailto:bugcollections@xxxxxxxxxxxxx>> wrote: > > > From: sammie smith <bugcollections@xxxxxxxxxxxxx > <mailto:bugcollections@xxxxxxxxxxxxx>> > > Subject: [tcb] Re: Question about painting my 23 Window > > To: tcb@xxxxxxxxxxxxx <mailto:tcb@xxxxxxxxxxxxx> > > Date: Wednesday, August 19, 2009, 10:10 AM > > You can make clear coat look > > better easier but original is single stage. And single > > stage is easier to repair problems. I use PPG Concept > > acrylic urethane. > > > > Wheel wells are painted body color. > > Undercarriage and belly pans are painted grey primer. > > I would just use a good quality grey paint acrylic > > urethane. > > > > Don't undercoat unless it is already > > undercoated. In which case it is almost impossible to > > remove the old undercoat. > > > > --- On Wed, 8/19/09, James Dwan > > <james_dwan_2000@xxxxxxxxx <mailto:james_dwan_2000@xxxxxxxxx>> wrote: > > > > > > From: James Dwan <james_dwan_2000@xxxxxxxxx > <mailto:james_dwan_2000@xxxxxxxxx>> > > Subject: [tcb] Question about painting my 23 Window > > To: tcb@xxxxxxxxxxxxx <mailto:tcb@xxxxxxxxxxxxx> > > Date: Wednesday, August 19, 2009, 9:05 AM > > > > > > > > > > > > > > > > > > The Bus has been blasted and body > > work is in progress. > > I am trying to decide if I should go > > single stage or clear coat. What are the pros and > > cons? > > Also, Jay, is suggesting that I use > > an undercoat for the wheel wells, splash pans and belly > > pans. > > > > > > My concern is that if anything like > > a rock hits the Bus with clear coat on it, it would be more > > difficult to touch it up than if it were single stage. > > > > > > Also the undercoating, even if mixed > > with paint wouldn't even resemble stock. I plan on > > driving it around the lake and to all the shows but not too > > much more than that. > > And lastly, should I paint the wheel > > wells and belly pans black? Or were they red? > > I am searching The Samba for pics > > but it's slow going. > > Thanks! > > >