I guess all of mine have just been very dirty. :-) sammie smith wrote: > True on all type I's that I have ever seen. Not true on split > busses. Grey and looks like primer. > > --- On *Wed, 8/19/09, Eric Woodall /<eric@xxxxxxxxxxxxxx>/* wrote: > > > From: Eric Woodall <eric@xxxxxxxxxxxxxx> > Subject: [tcb] Re: Question about painting my 23 Window > To: tcb@xxxxxxxxxxxxx > Date: Wednesday, August 19, 2009, 11:13 AM > > Every vw that I've ever owned has had a black undercoating. > Sammie/Will, what's the verdict? > > James Dwan wrote: >> Thanks for all the replies. I was leaning towards single stage >> and no undercoating but Jay was very keen on coating it. >> So when I se black belly pans on 23 Windows that is incorrect in >> general or was there a cutoff year when they painted them black >> instead of grey? >> >> >> --- On *Wed, 8/19/09, sammie smith >> /<bugcollections@xxxxxxxxxxxxx>/* wrote: >> >> >> From: sammie smith <bugcollections@xxxxxxxxxxxxx> >> Subject: [tcb] Re: Question about painting my 23 Window >> To: tcb@xxxxxxxxxxxxx >> Date: Wednesday, August 19, 2009, 10:10 AM >> >> You can make clear coat look better easier but original is >> single stage. And single stage is easier to repair >> problems. I use PPG Concept acrylic urethane. >> >> Wheel wells are painted body color. Undercarriage and belly >> pans are painted grey primer. I would just use a good >> quality grey paint acrylic urethane. >> >> Don't undercoat unless it is already undercoated. In which >> case it is almost impossible to remove the old undercoat. >> >> --- On *Wed, 8/19/09, James Dwan >> /<james_dwan_2000@xxxxxxxxx>/* wrote: >> >> >> From: James Dwan <james_dwan_2000@xxxxxxxxx> >> Subject: [tcb] Question about painting my 23 Window >> To: tcb@xxxxxxxxxxxxx >> Date: Wednesday, August 19, 2009, 9:05 AM >> >> The Bus has been blasted and body work is in progress. >> I am trying to decide if I should go single stage or >> clear coat. What are the pros and cons? >> Also, Jay, is suggesting that I use an undercoat for >> the wheel wells, splash pans and belly pans. >> >> My concern is that if anything like a rock hits the >> Bus with clear coat on it, it would be more difficult >> to touch it up than if it were single stage. >> >> Also the undercoating, even if mixed with paint >> wouldn't even resemble stock. I plan on driving it >> around the lake and to all the shows but not too much >> more than that. >> And lastly, should I paint the wheel wells and belly >> pans black? Or were they red? >> I am searching The Samba for pics but it's slow going. >> Thanks! >> >> >> >