Your pressure sender should have an idiot light hookup. I'd wire a diode to ground from the buzzer and the light since the idiot light post on your sender will go to ground when the pressure is low. +12v ----> Buzzer -----> |> diode ------> sender | +12V ----> Light -----> |> diode -- On Thu, 2007-10-18 at 18:13 -0500, j duncan wrote: > Okay, the oil pressure gauge reads (roughly) 27psi at idle and 70psi > with throttle. Replaced the sender unit but the light and buzzer still > comes on after about a 1 1/2 blocks (3rd gear). Ideas or suggestions, > please? > > I'm about to disconnect the d*mn thing just to go to Boerne in peace. > Or install an amp. ;) > > > ______________________________________________________________________ > Climb to the top of the charts! Play Star Shuffle: the word scramble > challenge with star power. Play Now!