I thought that all of that stuff was set?What were you trying to accomplish? ole blue ----- Original Message ----- From: Denis Dodson To: tcb@xxxxxxxxxxxxx Sent: Saturday, March 17, 2007 9:48 PM Subject: [tcb] Oh yeah, the tech problem Like I said. I set my springplates, on both sides, with a protractor and with the bus dead level, to 7 degrees. Both sides match. But with the wheels back on and tires on the ground the passenger side appears to be about an inch lower. I will measure better tomorrow, but if this is so, then I have a problem because if I set the springplates on one side higher it will screw up my camber. Is it possible that the body, somehow, is lower on one side? That should be detectable with a measure from a flat surface. Are KYB Gas-adjust shocks truly adjustable? Could my shock be weak or softer on one side? Should I take up a new hobby? I have a boatload of stamps... ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.13/725 - Release Date: 3/17/2007 12:33 PM