[tcb] Re: Nice day -- heater flap question
- From: Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Mon, 14 Feb 2011 16:54:06 -0600
Thank you.
I am missing the folded spring steel that the barrel nut goes into.
Just have the straight arms on both sides and the heater cables are
just about 2" too short (which made me think something else should be
in there).
Now I need to run back to my storage garage to see if I have them on
another set of heater boxes. This should be fun as it's where the bus
quit on me last week (fuel pump pivot pin) and I currently do not have
an operational rescue vehicle.
G2
On Mon, 14 Feb 2011 12:33:55 -0800 (PST)
Lonnie & Bonnie <bergmanfamily@xxxxxxxxxxxxx> wrote:
> Cool. You should have it now
>
> ________________________________
> From: Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx>
> To: tcb@xxxxxxxxxxxxx
> Sent: Mon, February 14, 2011 11:06:06 AM
> Subject: [tcb] Re: Nice day -- heater flap question
>
> It appears freelists may have eaten the message with the pics --- I
> never saw them on-list. YOU HAVE BEEN REDEEMED!!;-)
>
> Try again off-list
>
> Thanks,
>
> Gerald
>
> On Mon, 14 Feb 2011 08:32:27 -0800 (PST)
> Lonnie & Bonnie <bergmanfamily@xxxxxxxxxxxxx> wrote:
>
> > I apologize to everyone. I intended to send the pix off list.
> >
> >
> >
> >
> > ________________________________
> > From: Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx>
> > Sent: Sun, February 13, 2011 3:04:18 PM
> >
> > Could someone with a '68 - '71 crawl under their bus and take a
> > picture of the heater flap-to-cable connection? I think I'm missing
> > parts and the Bentley blowup is not helpful enough.
> >
> > G2
Other related posts:
