[tcb] Re: Need to borrow a 12V Flywheel
- From: Eric Woodall <type2list@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Fri, 21 Jan 2005 05:23:39 -0800 (PST)
Well the truth has been revealed!
I took the motor back out last night and it appears I need to do just a little
more grinding, but the "good" news is that the flywheel was a 6V (the one I
took out originally). So I took out the starter too, and low and behold it's a
6V too.
So I put the starter up to the new flywheel and the teeth don't want to mesh...
So I guess that's why it didn't want to engage the motor!
I just ordered one of those SR17X auto stick starters (you don't have to deal
with the bushings).
We'll see what happens then!
Denis Dodson <coocoo@xxxxxxxxxxxxxxxx> wrote:
I did all this when I put in the 12v flywheel but I left the starter motor
on and used it to turn the motor and do the cutting.
----- Original Message -----
From: "Mark Sawyer"
To:
Sent: Wednesday, January 19, 2005 9:56 AM
Subject: [tcb] Re: Need to borrow a 12V Flywheel
>
> good luck
> Eric Woodall wrote:alright mark, I'm going to try
> one more time tonight. I ground out a lot last night.
> If it don't fit this time then I'm going to consider putting the old
> flywheel back on...
> There just isn't a whole lot left to grind on in there!
> Mark Sawyer wrote:
> no I don't but I do have several different flywheels we can choose from.
> Eric Woodall wrote:Mark,
> Do you remember what diameter was?
> Mark Sawyer wrote:
> Hey Eric. I have a few of them at the house if you want to borrow
> one. ----- mark
> Eric Woodall wrote:Hello Everyone,
> Well I've almost got the engine installed in the '66 (big thanks to Dan
> Martin and Mark Sawyer), but the 12V Flywheel that was on my engine before
> was a little smaller than the one that is on there now (both 12V). So,
> that means that its bell housing grinding time...
> After installing and uninstalling about 5 times last night we had the
> bright idea of just putting a 12V flywheel of the same diameter up there
> to find out where it is rubbing...
>
> So, does anyone have an extra 12V flywheel that I could borrow just for an
> evening?
> It'll be returned to you unharmed!
>
> Thanks in advance!
>
> BTW Dan, your technical article is in the works...
>
>
>
> ---------------------------------
> Eric "Mr. Electric Wizard" Woodall
> 1966 Micro Bus De Luxe, 7 seater
> T.C.B.
> H.A.C.
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
>
>
>
>
>
>
> ---------------------------------
> Eric "Mr. Electric Wizard" Woodall
> 1966 Micro Bus De Luxe, 7 seater
> T.C.B.
> H.A.C.
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail - You care about security. So do we.
>
>
>
>
>
>
>
>
> ---------------------------------
> Eric "Mr. Electric Wizard" Woodall
> 1966 Micro Bus De Luxe, 7 seater
> T.C.B.
> H.A.C.
>
> ---------------------------------
> Do you Yahoo!?
> Meet the all-new My Yahoo! - Try it today!
>
>
>
>
>
>
>
---------------------------------
Eric "Mr. Electric Wizard" Woodall
1966 Micro Bus De Luxe, 7 seater
T.C.B.
H.A.C.
---------------------------------
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'
Other related posts:
