See you tomorrow Steve , Glad everything finally worked out. Paul Smith Transporters@The Point 8 October 7,8 and 9 ,2011 Morgan's Point Resort Texas --- On Fri, 9/30/11, Steve Chamberlain <steveraychamberlain@xxxxxxxxx> wrote: > From: Steve Chamberlain <steveraychamberlain@xxxxxxxxx> > Subject: [tcb] Re: Need master cylinder for 65 bus > To: tcb@xxxxxxxxxxxxx > Date: Friday, September 30, 2011, 8:43 PM > Thanks Steve-O, got up this morning and > put in the new mc, bench bled it then bled the whole system > several times. I got some brake but nothing like what it > needs. Finally took the bus to Metaphysical Volkswagen. I > put it up and pulled the front drums and Toby looked it > over. He checked that the brake line between the two > cylinders wasn't bottoming out before making a seal - > that looked to be OK. He said that the adjusters were at > different lengths (one side had about seven threads the > other had four on top and two on bottom. We adjusted those, > he played with it for a while and then he said 'OK > you're good to go' To my suprise it stoped about > 8" off the floor. Tyler drove it home and siad they > were great. That's why I'm not a mechanic. > > > I'm sure it won't hurt to have the new mc, the > lines were so rusted that I almost didn't get the old > one off. As long as everything holds Ty will be at Harvest > and we plan to drive back to Austin, AGAIN, on Sunday for > the show. going to the Glen Rose show tomorrow. > > > > On Thu, Sep 29, 2011 at 11:20 PM, Paul Smith <sealingwaxred@xxxxxxxxx> > wrote: > > > That's awesome > > Sent from my iPhone > > > > > On Sep 29, 2011, at 10:42 PM, Lisa and the Stevester <stevescott@xxxxxxxxx> > wrote: > > > It's now 10:42PM and Steve just left here with a > new German master cylinder for Tylers bus. > > > Hows that for service? > > > > > > > > > > Gary Alexander wrote: > > > >> Call Steve O at Central Texas > Autowerks...he'll have one for sure! > >> > > > > > > > > >