[tcb] Re: I remembered ...
- From: "Will" <evil.scientist.boo@xxxxxxxxx>
- To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
- Date: Mon, 7 Dec 2009 11:56:28 -0600
Those issues are of no concern when one has to work on a dub.
-- Sent from my Palm Pre
sammie smith wrote:
And make sure your spouse approves of stinky tranny gear oil in her oven.
--- On Mon, 12/7/09, Will <evil.scientist.boo@xxxxxxxxx> wrote:
From: Will <evil.scientist.boo@xxxxxxxxx>
Subject: [tcb] Re: I remembered ...
To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
Date: Monday, December 7, 2009, 8:56 AM
I've been there before too. Synthetics don't have that problem but another
trick is put the bottles in the oven and heat at 125F for 30 mins. Make sure
top is off..
-- Sent from my Palm Pre
Gerald Livingston wrote:
.. to make sure I could get the fill plug out before I pulled the
drain plug.
Then I spent 30 minutes poking around looking for the fill capacity of
a 002 before I realized that it doesn't matter because you "fill it
'til it spills".
Getting 7 pints of transaxle oil to go where you want it to in 50
degree weather without a pump kinda sucks. Luckily RedLine MT-90 flows
better in cold weather than plain old GL4.
Weather really needs to warm up so I can go back to cleaning.
G2
Other related posts:
