[tcb] Re: Generator pulley?

  • From: "Denis" <coocoo@xxxxxxx>
  • To: <tcb@xxxxxxxxxxxxx>
  • Date: Tue, 25 Aug 2009 22:11:22 -0500

put on the one you have and drive your bus around.
  ----- Original Message ----- 
  From: atx 
  To: tcb@xxxxxxxxxxxxx 
  Sent: Tuesday, August 25, 2009 10:07 PM
  Subject: [tcb] Re: Generator pulley?


  Thanks Denis,  I bought a stock style since I want to get him running.  I'll 
pick up the billet next week if it looks worthy.  The sales guy did offer a 
discount on the new part if I want it.

  Jeff


  sent via iPhone



  On Aug 25, 2009, at 9:30 PM, "Denis" <coocoo@xxxxxxx> wrote:


    Jeff, it's common, but not that common. I have had very little trouble in 9 
years. And that was a tightening thing. Take the one off the demo engine. Tell 
them to knock off $5 begause it's a demo.




      ----- Original Message ----- 
      From: atx 
      To: tcb@xxxxxxxxxxxxx 
      Sent: Tuesday, August 25, 2009 9:25 PM
      Subject: [tcb] Re: Generator pulley?


      Went by A Vdub today for a new pulley and belt.  According to their new 
parts guy the billet pulley is the same metal on both halves.  Unfotunately, he 
said he sold their only one 40 minutes before I got there.  He felt bad, but 
they did have one mounted on a demo engine.  It looked to be as good as 
advertised but I didn't get to hold it. 


      If it lasts twice as long as the new ones it's probably worth the money.  
The new ones have some spot welds, really look like they are an easy part to 
break.  I'll report more including who makes it, if anybody is interested.

      Jeff 


      sent via iPhone



      On Aug 24, 2009, at 7:02 PM, atx <atx_bus@xxxxxxxxx> wrote:


        That's a good question.  I'll get to see it first.  Hopefully I can go 
by VDub menaña.

        Jeff 


        sent via iPhone



        On Aug 24, 2009, at 6:21 PM, wuzmop@xxxxxxx wrote:


          I may be wrong, but I believe the inner part is still steel, the same 
as the others, it's just the outer part that's billet. Check that before 
dropping $50.


          -----Original Message-----
          From: atx <atx_bus@xxxxxxxxx>
          To: tcb@xxxxxxxxxxxxx <tcb@xxxxxxxxxxxxx>
          Sent: Mon, Aug 24, 2009 3:10 pm
          Subject: [tcb] Re: Generator pulley?


          What about a billet pulley?  Austin VeeDub stocks it and says they 
are much better than stock.  A bit pricey at $50 but maybe worth it.

          Jeff 


          sent via iPhone



          On Aug 24, 2009, at 3:37 PM, sammie smith 
<bugcollections@xxxxxxxxxxxxx> wrote:


                  Carry a couple of spares and stay out of Muskogee.

                  --- On Mon, 8/24/09, singlecabboy <sealingwaxred@xxxxxxxxx> 
wrote:


                    From: singlecabboy <sealingwaxred@xxxxxxxxx>
                    Subject: [tcb] Re: Generator pulley?
                    To: tcb@xxxxxxxxxxxxx
                    Date: Monday, August 24, 2009, 1:29 PM


                    Carry a extra throttle cable.I broke one two years in a row 
in Muskogee OK. I figured i'd either carry a spare or change routes to Eureka 
Springs.I think Dan broke one somewhere and it helped him out.
                    Paul Smith 

                      2009 Zone Tour 1999-2009 ,10 years of Trucking
                      
                    H.B.B 
                    T.C.B 
                    Transporters at the Point 6  October 9,10,and 11, 2009"Love 
all,trust a few,Do wrong to none"


                    --- On Mon, 8/24/09, sammie smith 
<bugcollections@xxxxxxxxxxxxx> wrote:

                    > From: sammie smith <bugcollections@xxxxxxxxxxxxx>
                    > Subject: [tcb] Re: Generator pulley?
                    > To: tcb@xxxxxxxxxxxxx
                    > Date: Monday, August 24, 2009, 9:15 AM
                    > Look
                    > for some originals at the next swap meet.
                    > 
                    > --- On Mon, 8/24/09, Mike Hayes
                    > <mike@xxxxxxxxxxxx> wrote:
                    > 
                    > 
                    > From: Mike Hayes <mike@xxxxxxxxxxxx>
                    > Subject: [tcb] Re: Generator pulley?
                    > To: tcb@xxxxxxxxxxxxx
                    > Date: Monday, August 24, 2009, 8:22 AM
                    > 
                    > 
                    > The new ones I've been getting
                    > are spot welded to the center hub part 
                    > with 3 welds and they break those welds.
                    > 
                    > sammie smith wrote:
                    > > Reasonably so. Check it occasionally and it will
                    > usually give you fair 
                    > > warning before catastrophic failure.  I have
                    > never had one crater on 
                    > > me on the road.  Have usually noticed
                    > deterioration before failure.
                    > >
                    > > --- On *Sun, 8/23/09, atx /<atx_bus@xxxxxxxxx>/*
                    > wrote:
                    > >
                    > >
                    > >     From: atx <atx_bus@xxxxxxxxx>
                    > >     Subject: [tcb] Re: Generator
                    > pulley?
                    > >     To: "tcb@xxxxxxxxxxxxx"
                    > <tcb@xxxxxxxxxxxxx>
                    > >     Date: Sunday, August 23, 2009,
                    > 10:47 PM
                    > >
                    > >     Thanks for the lists, a pulley
                    > wasn't on mine.  It will be now.
                    > >
                    > >     Also, I remember Dan having a
                    > good list.
                    > >
                    > >     So it's an easy enough
                    > fix, and worth carrying a spare, but is
                    > >     failure of this part common? 
                    > >
                    > >     Jeff
                    > >
                    > >     sent via iPhone
                    > >
                    > >
                    > >     On Aug 23, 2009, at 9:26 PM,
                    > Mike Hayes <mike@xxxxxxxxxxxx
                    > >     
<http://us.mc833.mail.yahoo.com/mc/compose?to=mike@xxxxxxxxxxxx>>
                    > >     wrote:
                    > >
                    > >     Wow such a small list. 
                    > :-)    I'm sure there is something I forgot.
                    > >
                    > >     I carry that and....
                    > >
                    > >     points
                    > >     cap
                    > >     rotor
                    > >     condenser
                    > >     1 set plugs
                    > >     1 long plug wire
                    > >     1 engine gasket kit
                    > >     1 set of wheel bearings
                    > >     nuts, bolts, washers and
                    > cotter pins
                    > >     a well used but good
                    >  distributer
                    > >     new fuel pump
                    > >     clutch cable
                    > >     throttle cable
                    > >     old but good coil
                    > >     bulbs, fuses extra wire
                    > >     high temp silicon
                    > >     jb weld
                    > >     duck tape
                    > >     zip tie's
                    > >     Flash light
                    > >     small floor jack
                    > >     4 way lug wrench
                    > >     couple of fuel filters
                    > >     couple feet of fuel line
                    > >     5 quart jug of oil
                    > >     brake fluid
                    > >     Toolbox
                    > >
                    > >
                    > >
                    > >
                    > >
                    > >     Alma Jo Barrera wrote:
                    > >     There is an unspoken
                    >  emergency kit that should be carried with you
                    > >     at all times.
                    > >
                    > >     1. fire extinguisher
                    > >     2. belt
                    > >     3. pulley ( yes I have had one
                    > just shatter)
                    > >     4. shims
                    > >     5. woodruff key
                    > >     6. fire extinguisher (again)
                    > >     7. accelerator cable
                    > >     8. clutch cable
                    > >     9. flares
                    > >     10. cold beer
                    > >
                    > >     Other Vokies can probably add
                    > to the list, I am a fairly newbie
                    > >     and still don't know all
                    > the ins and outs.
                    > >
                    > >     I was told that as soon as the
                    > belt brakes or pulley goes out to
                    > >     pull over..no ands, if or buts
                    > about it.
                    >  So I have just made that
                    > >     my rule of thumb.
                    > >
                    > >     Alma jo
                    > >
                    > >
                    > >
                    > >
                    > >
                    > >
                    > >
                    > >          
                    > >
                    > >
                    > 
                    >

                 


          __________________________________________________
          Do You Yahoo!?
          Tired of spam? Yahoo! Mail has the best spam protection around 
          http://mail.yahoo.com 





Other related posts: