[tcb] Re: Generator pulley?
- From: sammie smith <bugcollections@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Mon, 24 Aug 2009 07:15:34 -0700 (PDT)
Look for some originals at the next swap meet.
--- On Mon, 8/24/09, Mike Hayes <mike@xxxxxxxxxxxx> wrote:
From: Mike Hayes <mike@xxxxxxxxxxxx>
Subject: [tcb] Re: Generator pulley?
To: tcb@xxxxxxxxxxxxx
Date: Monday, August 24, 2009, 8:22 AM
The new ones I've been getting are spot welded to the center hub part
with 3 welds and they break those welds.
sammie smith wrote:
> Reasonably so. Check it occasionally and it will usually give you fair
> warning before catastrophic failure. I have never had one crater on
> me on the road. Have usually noticed deterioration before failure.
>
> --- On *Sun, 8/23/09, atx /<atx_bus@xxxxxxxxx>/* wrote:
>
>
> From: atx <atx_bus@xxxxxxxxx>
> Subject: [tcb] Re: Generator pulley?
> To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
> Date: Sunday, August 23, 2009, 10:47 PM
>
> Thanks for the lists, a pulley wasn't on mine. It will be now.
>
> Also, I remember Dan having a good list.
>
> So it's an easy enough fix, and worth carrying a spare, but is
> failure of this part common?
>
> Jeff
>
> sent via iPhone
>
>
> On Aug 23, 2009, at 9:26 PM, Mike Hayes <mike@xxxxxxxxxxxx
> <http://us.mc833.mail.yahoo.com/mc/compose?to=mike@xxxxxxxxxxxx>>
> wrote:
>
> Wow such a small list. :-) I'm sure there is something I forgot.
>
> I carry that and....
>
> points
> cap
> rotor
> condenser
> 1 set plugs
> 1 long plug wire
> 1 engine gasket kit
> 1 set of wheel bearings
> nuts, bolts, washers and cotter pins
> a well used but good distributer
> new fuel pump
> clutch cable
> throttle cable
> old but good coil
> bulbs, fuses extra wire
> high temp silicon
> jb weld
> duck tape
> zip tie's
> Flash light
> small floor jack
> 4 way lug wrench
> couple of fuel filters
> couple feet of fuel line
> 5 quart jug of oil
> brake fluid
> Toolbox
>
>
>
>
>
> Alma Jo Barrera wrote:
> There is an unspoken emergency kit that should be carried with you
> at all times.
>
> 1. fire extinguisher
> 2. belt
> 3. pulley ( yes I have had one just shatter)
> 4. shims
> 5. woodruff key
> 6. fire extinguisher (again)
> 7. accelerator cable
> 8. clutch cable
> 9. flares
> 10. cold beer
>
> Other Vokies can probably add to the list, I am a fairly newbie
> and still don't know all the ins and outs.
>
> I was told that as soon as the belt brakes or pulley goes out to
> pull over..no ands, if or buts about it. So I have just made that
> my rule of thumb.
>
> Alma jo
>
>
>
>
>
>
>
>
>
>
Other related posts:
