[tcb] Re: Front door hard to open
- From: "chuck blue" <sukchew@xxxxxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Thu, 4 Dec 2008 18:26:55 -0600
Correction.lubricate the weather strip rubber sealing rubber along with
adjusting and lubricating the striker.You know what I mean..
----- Original Message -----
From: chuck blue
To: tcb@xxxxxxxxxxxxx
Sent: Thursday, December 04, 2008 5:53 PM
Subject: [tcb] Re: Front door hard to open
Lubricate the striker and adjust the sealing rubber.
----- Original Message -----
From: treyjung
To: tcb@xxxxxxxxxxxxx
Sent: Thursday, December 04, 2008 4:41 PM
Subject: [tcb] Front door hard to open
On my bus when I pull on the inside release lever to get out - I have to
bump the door to get out of the bus - I pulled the panel off and bent the
connected rod using 2 pliers and its not really better. Wondering if I need to
bend the heck out of it to get it to release better? Or is it the lock
cylinder / mechanism I need to clean up or oil again.
Sugestions?
Trey
Other related posts:
