cancell the part about fixing the seal on thursday it was Fri. Denis and steve went to Springdale to get the parts , we met them at the shop and Steve changed the seal ,we topped the trans fluid up , took a test drive no leaks. we all went down to a nice cafe by Denis's house , we took off to Eueka and the rest stayed at Denis's house, oh yhea Denis's neighbor came out yelling that Joe needed to move his truck ,so she scared him so badly that he hit a tree and messed up his bumper and buckeled the fender . Back at the hotel I pulled up beside Sammie's Bev's Bakery panel and like anytime you see something really nice for the first time it's kinda leaves you breathless , anyway I chose him best of show on the spot.well as sometimes in life it happens Cypress goes to balsa real quick, the seal was leaking again. We went to the swap meet and got another seal set, took the truck down to the bottom of the parking lot and began the work , also we found a 36 mm socket (i think) for the axtle nut. This is where it gets kinda emotional , there were VW experts coming out of the woodwork to in there words "have the Honor of working on the Zone" Anthony from OKC, Jeff Speer s from Ark. , Dave ,Roger , Bob all from Iowa and others that I know but didn't know there name .We changed the seal and took another test ride and everything appeared ok , It was either fixed or no fluid . we visitted in the parking lot and hit the bed . Paul Smith www.23window.com/thezone Why do I have to push "1" for English T.C.B. H.B.B.