[tcb] Re: Chinese Repops
- From: sammie smith <bugcollections@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Mon, 22 Nov 2010 13:56:19 -0800 (PST)
Well, that's what I meant by reverse engineering. But, yeah, if you start with
a poor copy you're gonna get a worse copy with reverse engineering.
--- On Mon, 11/22/10, Ken <dblcab67@xxxxxxxxx> wrote:
From: Ken <dblcab67@xxxxxxxxx>
Subject: [tcb] Re: Chinese Repops
To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
Cc: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
Date: Monday, November 22, 2010, 2:47 PM
Sammie I think the deal is in china they don't use a blueprint. They simply
copy a part they have physical possession of. Probably the part they are
copying isn't even OG. So they end up making a poor copy of poorly made copy.
Hence you get the result we see now. That's my guess anyway.
Ken
Sent by pure magic
On Nov 22, 2010, at 1:31 PM, sammie smith <bugcollections@xxxxxxxxxxxxx> wrote:
I don't think Chinese food made and prepared in the US qualifies. My problem
is I don't think the Chinese mfg in China can either read a blue print (do we
still call them that) or reverse engineer a part. Then of course there is the
problem of them trying to export lots of lead in paint. Not a chemist so I
haven't figured that one out. Do they simply have an overabundance of lead
that they are trying to get rid of?
--- On Mon, 11/22/10, wuzmop@xxxxxxx <wuzmop@xxxxxxx> wrote:
From: wuzmop@xxxxxxx <wuzmop@xxxxxxx>
Subject: [tcb] Re: Chinese Repops
To: tcb@xxxxxxxxxxxxx
Date: Monday, November 22, 2010, 12:49 PM
Those bastards!
We ordered chinese on Saturday, and they forgot the wifes chicken fried rice!
-----Original Message-----
From: Mike Hayes <mike@xxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Mon, Nov 22, 2010 12:26 pm
Subject: [tcb] Re: Chinese Repops
Last week I drove my bus to get Chinese food and I ordered orange chix and when
I got home it was kung pow chix. Oh ya and my 6 month old fan made in china
came apart a couple of weeks ago.
On 11/22/2010 12:22 PM, wuzmop@xxxxxxx wrote:
On a related note, I have experienced 2 in the last 6 months, purchased from
different vendors, where the pass side heat riser is nicely welded and at the
right angle, but the other side was apparently assembled by a blind employee.
It was so poorly welded and at an angle that wasn't even close enough to fit.
-----Original Message-----
From: sammie smith <bugcollections@xxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Mon, Nov 22, 2010 12:15 pm
Subject: [tcb] Chinese Repops
It's Monday and there is not much traffic on here so I thought I would throw
out a tidbit of inormation.
Just got through reading a news release on a recall of Walt Disney glasses
(drinking) that were being sold at DisneyLand/World. Made in China, painted
Disney characters on the glasses, contain something like 400 times the safe
lead level content in the paint.
Yesterday, friend called. Wanted to know if I had a center intake manifold for
dual port; duh, yeah, how many do you want. He had just bought a new one ($75)
and started installing it. Guess what: The long pipe was on the short pipe
side and the short pipe was on the long side. Will install and work just fine
except the carb would now be located just about the center of the generator.
Guess where it was made?
And at $75 each I have just discovered I am rich.
And I can't wait to buy the next Chinese made VW part for my bus.
Sent by pure magic
On Nov 22, 2010, at 1:31 PM, sammie smith <bugcollections@xxxxxxxxxxxxx> wrote:
I don't think Chinese food made and prepared in the US qualifies. My problem
is I don't think the Chinese mfg in China can either read a blue print (do we
still call them that) or reverse engineer a part. Then of course there is the
problem of them trying to export lots of lead in paint. Not a chemist so I
haven't figured that one out. Do they simply have an overabundance of lead
that they are trying to get rid of?
--- On Mon, 11/22/10, wuzmop@xxxxxxx <wuzmop@xxxxxxx> wrote:
From: wuzmop@xxxxxxx <wuzmop@xxxxxxx>
Subject: [tcb] Re: Chinese Repops
To: tcb@xxxxxxxxxxxxx
Date: Monday, November 22, 2010, 12:49 PM
Those bastards!
We ordered chinese on Saturday, and they forgot the wifes chicken fried rice!
-----Original Message-----
From: Mike Hayes <mike@xxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Mon, Nov 22, 2010 12:26 pm
Subject: [tcb] Re: Chinese Repops
Last week I drove my bus to get Chinese food and I ordered orange chix and when
I got home it was kung pow chix. Oh ya and my 6 month old fan made in china
came apart a couple of weeks ago.
On 11/22/2010 12:22 PM, wuzmop@xxxxxxx wrote:
On a related note, I have experienced 2 in the last 6 months, purchased from
different vendors, where the pass side heat riser is nicely welded and at the
right angle, but the other side was apparently assembled by a blind employee.
It was so poorly welded and at an angle that wasn't even close enough to fit.
-----Original Message-----
From: sammie smith <bugcollections@xxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Mon, Nov 22, 2010 12:15 pm
Subject: [tcb] Chinese Repops
It's Monday and there is not much traffic on here so I thought I would throw
out a tidbit of inormation.
Just got through reading a news release on a recall of Walt Disney glasses
(drinking) that were being sold at DisneyLand/World. Made in China, painted
Disney characters on the glasses, contain something like 400 times the safe
lead level content in the paint.
Yesterday, friend called. Wanted to know if I had a center intake manifold for
dual port; duh, yeah, how many do you want. He had just bought a new one ($75)
and started installing it. Guess what: The long pipe was on the short pipe
side and the short pipe was on the long side. Will install and work just fine
except the carb would now be located just about the center of the generator.
Guess where it was made?
And at $75 each I have just discovered I am rich.
And I can't wait to buy the next Chinese made VW part for my bus.
Other related posts:
