[tcb] Re: Checking heads out (Mark Sawyer) for leaks
- From: Mark Sawyer <mechmark@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Fri, 18 Jan 2008 19:48:44 -0800 (PST)
place the heads cylinder side down and spray WD-40 in the exhaust and intake
ports. let them sit for about 15 minutes and then pick them straight up and
look underneath. If the valves are sealing well, it will be dry around them. If
not, it's time for a valve job.
Trey Jung <treyjung@xxxxxxxxxxx> wrote: Mark
Didn;t you tell me to turn the heads over and spray WD 40 on them to see if
the valves leak?
What was it that I needed to do? I forgot...
Trey
Other related posts:
