[tcb] Re: Bus door seals
- From: James Dwan <james_dwan_2000@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Mon, 23 Nov 2009 10:19:20 -0800 (PST)
You're good to go then, if you get stuck just do a search on The Samba, I used
a thread on there the first time I did the vent windows and it helped.Good luck
--- On Mon, 11/23/09, Alma Jo Barrera <patchmongrel1@xxxxxxxxxx> wrote:
From: Alma Jo Barrera <patchmongrel1@xxxxxxxxxx>
Subject: [tcb] Re: Bus door seals
To: tcb@xxxxxxxxxxxxx
Date: Monday, November 23, 2009, 11:47 AM
No small kids in this house.
They are mostly German , but I think the scrapers
were Brazilian.
I have done them in old mustangs a few times so I
hope they are about the same.
Alma Jo
----- Original Message -----
From:
James Dwan
To: tcb@xxxxxxxxxxxxx
Sent: Monday, November 23, 2009 8:32
AM
Subject: [tcb] Re: Bus door seals
Yes, yes and yes. My advice is not to have small children
around when doing the vent windows for the first time. It can be
frustrating. I don't think it's possible to remove the vent window
without disconnecting the main window from the regulator at least. If
you got felts then it's easier with it out.
Did you get German or Brazilian door seals?
--- On Mon, 11/23/09, Alma Jo Barrera
<patchmongrel1@xxxxxxxxxx> wrote:
From:
Alma Jo Barrera <patchmongrel1@xxxxxxxxxx>
Subject: [tcb] Bus
door seals
To: "TCB" <tcb@xxxxxxxxxxxxx>
Date: Monday,
November 23, 2009, 7:43 AM
K.
bought all the rubber for the doors and windows on my 70 Bay
Window bus. Advice from someone that has done it before needed.
Do I need to pull the glass out?
Do the vents window need to be done 1st?
Do they need to be removed to replace that seal also?
Alma
Jo
Other related posts:
