Ronnie pull the line off and look down the hole see if has the funnel cone down in it ,if so the auto parts houses may have 8 inch steel line with a deeper thread you can bend it by carfuly by hand that should fix it. ----- Original Message ---- From: Ronnie Hughes <fracdogii@xxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Monday, December 31, 2007 5:01:25 PM Subject: [tcb] Brakes Mark, I was trying to bleed my brakes today on Krusty and I had brake fluid running out of the drum. Pulled the drum on the passenger side and both connectors on the s shaped metal line run out of thread before they bottom out. I can tighten it all the way down and still move the metal line back and forth about 1/16". It seems like they machined the ports too deep. I threw away the old wheel cylinders so I don't have anything to compare them to. Have you ever heard of this? Ronnie Looking for last minute shopping deals? Find them fast with Yahoo! Search.