[tcb] Re: Any Vanagon owners reseal their gas tank recenlty?
- From: mechmark@xxxxxxxxxxx
- To: tcb@xxxxxxxxxxxxx
- Date: Wed, 6 May 2009 16:59:55 +0000 (UTC)
I was wondering if the idle problem you have been having is related to the tank
not holding pressure. Would that effect the fuel pressure if the tank is
venting too much???
----- Original Message -----
From: "Eric Woodall" <eric@xxxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Wednesday, May 6, 2009 9:29:07 AM GMT -06:00 US/Canada Central
Subject: [tcb] Re: Any Vanagon owners reseal their gas tank recenlty?
Yeah, I have been told to cut the old hose off of the plastic nipples.
Don't try and pull the hose off because it'll break the plastic.
A couple of things I'm having trouble with:
1) Getting the straps that hold the tank up off. I took the bolts out,
but the rears that fit through the slots are not coming out.
2) I unbolted the expansion tank, but I am having trouble dropping the
expansion tanks down. I guess the hose on the top part (where the
sensor) is preventing it from dropping? Might need to drop the tank first?
whocanduncan@xxxxxxxxxxx wrote:
> The plastic expansion tanks will be very brittle. Be careful when pulling off
> the old hose. The hose nibs are especially easy to break. The tanks are
> obsolete and difficult to find new. Junkyards have them but they are old and
> brittle, too. Good luck. Don't blow yourself up!
>
> ____________________________________________________________
> Compete with the big boys. Click here to find products to benefit your
> business.
> http://thirdpartyoffers.netzero.net/TGL2231/fc/BLSrjnxUkjC5ZBzOW0M6l6bWjxCAoPN3tPbaYge5K5uMTssXBbPWhCk1PVW/
>
>
>
>
>
Other related posts:
